IB DIPLOMA · STANDARD LEVEL

IB Math AA SL
Syllabus

Build reliable algebra, explain a graph and connect differentiation with integration. Use this AA SL study map to see the current topics, paper rules and skills worth revisiting.

Mathematics: Analysis and Approaches SL

WHAT THIS COURSE ASKS OF YOU

How to approach AA SL

AA SL places substantial emphasis on reasoning with expressions and showing a method without technology. Calculator practice still matters for Paper 2, but a graphing result needs to be connected to the mathematics you were asked to explain.

This is an independent study guide, not the official IB syllabus document. Skills are grouped in plain language so you can plan practice; the group numbers are not IB subtopic codes. Use the official guide and your teacher’s directions for the full requirements and prior learning.

CURRENT COURSE · THROUGH NOVEMBER 2028

Your AA SL topic checklist

Choose one skill, try a question and explain the decision behind your answer.

36 study skills across five topic areas.

01

Number and algebra

19 recommended hours · 7 study skills

Make algebraic structure explicit before using a formula.

  • Write and calculate with powers of ten

    Move between ordinary numbers and scientific notation. Keep the coefficient and exponent meaningful when estimating an answer or checking its size.

    • Write the coefficient between 1 inclusive and 10 exclusive in magnitude for a non-zero number. A negative exponent represents a small magnitude, not a negative number.
    • When multiplying, multiply coefficients and add exponents; when adding, first express both quantities using the same power of ten.
    Scientific notation
    a×10k(1≤∣a∣<10, k∈Z)a\times10^k\quad(1\leq |a|<10,\ k\in\mathbb Z)
  • Build arithmetic sequences and sums

    Find a common difference, express a general term and total a finite sequence. Read and write sigma notation, including a starting index that is not one.

    • Here u₁ is the first term, d the common difference and n a positive integer. Find d by subtracting consecutive terms.
    • Expand the first few terms of a sigma expression to check its lower limit. An arithmetic sum is the number of terms multiplied by their average.
    Term and finite sum
    un=u1+(n−1)du_n=u_1+(n-1)d
    Two equivalent sum forms
    Sn=n2(2u1+(n−1)d)=n2(u1+un)S_n=\frac n2(2u_1+(n-1)d)=\frac n2(u_1+u_n)
    Sigma notation
    Sn=∑k=1nukS_n=\sum_{k=1}^{n}u_k
  • Work with geometric growth and decay

    Identify a constant ratio, calculate terms and finite sums, and model repeated percentage changes. Distinguish a one-off percentage increase from repeated compounding.

    • For a geometric sequence divide a term by its predecessor to identify r. The finite-sum formula below assumes r ≠ 1; if r = 1, the sum is nu₁.
    • For compound interest, P is principal, R is the nominal annual percentage rate, k the number of compounding periods per year and t the number of years. Depreciation uses a multiplier below one.
    Geometric term and sum
    un=u1rn−1,Sn=u1(1−rn)1−ru_n=u_1r^{n-1},\qquad S_n=\frac{u_1(1-r^n)}{1-r}
    Compound interest
    A=P(1+R100k)ktA=P\left(1+\frac{R}{100k}\right)^{kt}
  • Decide whether an infinite geometric sum exists

    Check the size of the common ratio before finding a sum to infinity. Explain why the condition on the ratio matters rather than applying a formula to every sequence.

    • The terms and the uncounted tail must tend to zero. This happens for a geometric series only when the magnitude of r is less than one.
    • A negative ratio can converge too: its terms alternate in sign. A ratio of 1 or −1 does not satisfy the convergence condition.
    Convergent geometric sum
    S∞=u11−r,∣r∣<1S_\infty=\frac{u_1}{1-r},\qquad |r|<1
  • Use indices and logarithms

    Simplify rational powers and logarithmic expressions, change logarithm bases and solve exponential equations. Check that every logarithm has a valid argument.

    • For real logarithms the argument must be positive, the base positive and the base different from one. The logarithm of a sum does not split into a sum of logarithms.
    • Use a common base or take logarithms to isolate an unknown exponent. Check any candidate solution in the original equation.
    Index laws
    aman=am+n,(am)n=amna^ma^n=a^{m+n},\qquad (a^m)^n=a^{mn}
    Logarithm laws
    log⁡a(xy)=log⁡ax+log⁡ay\log_a(xy)=\log_a x+\log_a y
    Powers and change of base
    log⁡a(xr)=rlog⁡ax,log⁡ax=ln⁡xln⁡a\log_a(x^r)=r\log_a x,\qquad\log_a x=\frac{\ln x}{\ln a}
  • Expand a positive-integer binomial

    Use combinations or Pascal’s triangle to select a coefficient or term in a binomial expansion. Keep the power of each factor attached to its coefficient.

    • For a non-negative integer n the expansion has n + 1 terms. In term k + 1, the power of a is n − k and the power of b is k.
    • To find a specific coefficient, include any sign or numerical factor inside b. Distinguish a term’s position from its exponent.
    Binomial expansion
    (a+b)n=∑k=0n(nk)an−kbk(a+b)^n=\sum_{k=0}^{n}\binom nk a^{n-k}b^k
    Combination coefficient
    (nk)=n!k!(n−k)!\binom nk=\frac{n!}{k!(n-k)!}
  • Write a short deductive argument

    Start from a stated assumption or known result and justify each algebraic step. Distinguish proving an identity from checking a few numerical examples.

    • State which numbers the claim concerns and start from definitions or an established identity. A numerical check may reveal an error but does not prove a universal statement.
    • For an identity, transform one side into the other using justified equalities. Division by a potentially zero expression requires a separate case.
    Example: sum of consecutive integers
    n+(n+1)=2n+1(n∈Z)n+(n+1)=2n+1\quad(n\in\mathbb Z)
02

Functions

21 recommended hours · 8 study skills

Move between exact expressions, graphs and restrictions on inputs.

  • Connect a line to its equation

    Find gradients, intercepts and equations of lines; recognise parallel and perpendicular relationships. Relate an equation to the quantities and units on its axes.

    • Gradient is change in the vertical coordinate divided by change in the horizontal coordinate. A vertical line has equation x = c and no finite gradient.
    • Parallel non-vertical lines have equal gradients; perpendicular finite gradients multiply to −1. Handle a horizontal/vertical pair separately.
    Gradient and point-gradient form
    m=y2−y1x2−x1,y−y1=m(x−x1)m=\frac{y_2-y_1}{x_2-x_1},\qquad y-y_1=m(x-x_1)
    Slope-intercept form
    y=mx+cy=mx+c
  • Read domain, range and function notation

    Evaluate functions and identify allowed inputs and possible outputs. Explain why a mathematical expression may need a smaller domain when it models a real situation.

    • Function notation f(a) means the output at input a. The domain lists permitted inputs; the range lists the outputs actually attained.
    • Exclude zero denominators and negative radicands of real square roots. Context can impose further bounds, such as time being non-negative.
    Example with a domain restriction
    f(x)=1x−2,x∈R∖{2}f(x)=\frac1{x-2},\qquad x\in\mathbb R\setminus\{2\}
  • Compose and invert functions

    Track the order in a composition and find an inverse where it exists. Use a suitable domain restriction and check the result by composition or a graph.

    • In f ∘ g, apply g first, then f. Inputs must belong to the domain of g and give outputs accepted by f.
    • An inverse reverses the mapping and is reflected in y = x. A function must be one-to-one on its chosen domain to have an inverse function.
    Composition and inverse checks
    (f∘g)(x)=f(g(x)),f−1(f(x))=x(f\circ g)(x)=f(g(x)),\qquad f^{-1}(f(x))=x
    Quadratic inverse after restriction
    f(x)=x2, x≥0⟹f−1(x)=xf(x)=x^2,\ x\geq0\quad\Longrightarrow\quad f^{-1}(x)=\sqrt x
  • Move between quadratic forms

    Use expanded, factorised and vertex forms to find intercepts, roots and turning points. Solve quadratic equations or inequalities and interpret the discriminant.

    • Factorised form reveals roots; completing the square reveals the vertex. The coefficient a controls concavity and vertical scale.
    • For real coefficients, a positive discriminant gives two distinct real roots, zero a repeated root and a negative value no real roots. Use a sign chart when solving inequalities.
    Three quadratic forms
    f(x)=ax2+bx+c=a(x−r1)(x−r2)=a(x−h)2+kf(x)=ax^2+bx+c=a(x-r_1)(x-r_2)=a(x-h)^2+k
    Roots and discriminant
    x=−b±b2−4ac2a,Δ=b2−4acx=\frac{-b\pm\sqrt{b^2-4ac}}{2a},\qquad\Delta=b^2-4ac
  • Sketch reciprocal and rational functions

    Identify excluded inputs and horizontal or vertical asymptotes in the SL rational forms. Use those features to check the shape of a graph.

    • For the transformed reciprocal below, the centre is (h, k), the vertical asymptote x = h and the horizontal asymptote y = k.
    • For a linear-over-linear rational function, first identify denominator zeros. Check whether a common factor cancels: an excluded input remains excluded even if the expression simplifies.
    Reciprocal transformation
    y=ax−h+k(a≠0)y=\frac{a}{x-h}+k\quad(a\ne0)
    Linear rational form
    y=ax+bcx+d(cx+d≠0)y=\frac{ax+b}{cx+d}\quad(cx+d\ne0)
  • Interpret exponential and logarithmic graphs

    Connect growth or decay to an equation and recognise inverse relationships. Use algebra or a graph to solve an equation and check its solution.

    • For a positive base b different from one, exponential and logarithmic functions are inverses. Exponential growth has b > 1; decay has 0 < b < 1.
    • The basic exponential has positive outputs and a horizontal asymptote; the basic logarithm has positive inputs and a vertical asymptote. Transformations can move these features.
    Inverse relationship
    y=bx⟺x=log⁡byy=b^x\quad\Longleftrightarrow\quad x=\log_b y
    Natural-base model
    y=Aekxy=Ae^{kx}
  • Describe a sequence of graph transformations

    Apply translations, reflections and horizontal or vertical stretches. Explain the effect on a particular point rather than relying on a memorised sketch alone.

    • A change outside f affects outputs; a change inside affects inputs. A horizontal stretch factor is reciprocal to the multiplier of x.
    • Track a known point through the transformation and check the order. A negative vertical scale reflects in the x-axis; a negative horizontal scale reflects in the y-axis.
    A general transformed graph
    g(x)=af(b(x−h))+k(a,b≠0)g(x)=a f(b(x-h))+k\quad(a,b\ne0)
    Point mapping
    (x,y)⟼(h+xb, k+ay)(x,y)\longmapsto\left(h+\frac xb,\ k+ay\right)
  • Solve equations with a suitable method

    Choose exact algebra, a graphical intersection or numerical technology according to the task. State the answer with the accuracy and domain the question requires.

    • An intersection of y = f(x) and y = g(x) gives a solution of f(x) = g(x). A zero of f − g expresses the same problem.
    • For inequalities, identify boundary values and test intervals. Squaring or multiplying by an expression of unknown sign can change a solution set, so verify the result.
    Graphical or algebraic equation setup
    f(x)=g(x)⟺f(x)−g(x)=0f(x)=g(x)\quad\Longleftrightarrow\quad f(x)-g(x)=0
03

Geometry and trigonometry

25 recommended hours · 7 study skills

Link a geometric diagram to an exact trigonometric argument.

  • Use coordinates and measurements in space

    Calculate distances and midpoints in three dimensions and work with lengths, areas and volumes of solids. Draw a clear diagram before choosing a triangle.

    • Use the perpendicular coordinate differences as the legs of a three-dimensional right-triangle argument. The midpoint averages each coordinate separately.
    • For composite solids, identify shared or hidden faces before adding surface areas. A cone’s slant height is different from its perpendicular height.
    Distance in three dimensions
    d=(x2−x1)2+(y2−y1)2+(z2−z1)2d=\sqrt{(x_2-x_1)^2+(y_2-y_1)^2+(z_2-z_1)^2}
    Midpoint
    M=(x1+x22,y1+y22,z1+z22)M=\left(\frac{x_1+x_2}2,\frac{y_1+y_2}2,\frac{z_1+z_2}2\right)
    Volumes: pyramid, cone and sphere
    Vpyramid=13Ah,Vcone=13πr2h,Vsphere=43πr3V_{\rm pyramid}=\frac13 Ah,\quad V_{\rm cone}=\frac13\pi r^2h,\quad V_{\rm sphere}=\frac43\pi r^3
    Curved surface areas: cone and sphere
    Acone=πrℓ,Asphere=4πr2A_{\rm cone}=\pi r\ell,\qquad A_{\rm sphere}=4\pi r^2
    Cylinder volume and total surface area
    V=πr2h,A=2πrh+2πr2V=\pi r^2h,\qquad A=2\pi rh+2\pi r^2
    Hemisphere volume and total surface area
    V=23πr3,A=3πr2V=\frac23\pi r^3,\qquad A=3\pi r^2
  • Solve triangles in context

    Use right-triangle ratios, the sine rule, cosine rule and triangle area formula. Consider the ambiguous sine-rule case and check whether an angle is plausible.

    • Label side a opposite angle A, and likewise for b and c. Use the cosine rule for two sides and their included angle, or for all three sides.
    • With sine-rule side-side-angle information, an acute angle from inverse sine may have a supplementary candidate. Check each against the angle sum and stated geometry.
    Right-triangle ratios
    sin⁡θ=oppositehypotenuse,cos⁡θ=adjacenthypotenuse\sin\theta=\frac{\mathrm{opposite}}{\mathrm{hypotenuse}},\quad\cos\theta=\frac{\mathrm{adjacent}}{\mathrm{hypotenuse}}
    Tangent ratio
    tan⁡θ=oppositeadjacent\tan\theta=\frac{\mathrm{opposite}}{\mathrm{adjacent}}
    Sine and cosine rules
    asin⁡A=bsin⁡B=csin⁡C\frac a{\sin A}=\frac b{\sin B}=\frac c{\sin C}
    Cosine rule and area
    c2=a2+b2−2abcos⁡C,K=12absin⁡Cc^2=a^2+b^2-2ab\cos C,\qquad K=\frac12 ab\sin C
  • Translate a written situation into a diagram

    Represent elevation, depression, bearings and spatial geometry with labelled lengths and angles. Keep a consistent reference direction throughout the solution.

    • Measure bearings clockwise from north and state them using three figures. Draw a north line at each relevant location before finding an interior triangle angle.
    • Elevation and depression are measured from horizontal lines. In three dimensions, isolate the plane containing the angle; a line–plane angle uses the line’s projection onto the plane.
    Pythagoras in a right triangle
    a2+b2=c2a^2+b^2=c^2
    Horizontal distance x and height h
    tan⁡θ=hx\tan\theta=\frac hx
  • Use radians for circular measurement

    Convert between degrees and radians and calculate arc length and sector area. Match the formula to the angle unit before substituting a value.

    • One full revolution is 2π radians. These arc and sector formulas require the angle in radians, even if the question starts in degrees.
    • For a circular segment subtract the triangle area from its sector. A perimeter may include two radii or a chord as well as an arc.
    Degree–radian conversion
    θrad=π180θdeg\theta_{\rm rad}=\frac{\pi}{180}\theta_{\rm deg}
    Arc length and sector area
    s=rθ,A=12r2θs=r\theta,\qquad A=\frac12r^2\theta
    Segment area for 0 ≤ θ ≤ π
    Asegment=12r2(θ−sin⁡θ)A_{\rm segment}=\frac12r^2(\theta-\sin\theta)
  • Read the unit circle and exact values

    Find sine, cosine and tangent for standard angles and related angles. Use the quadrant to determine the sign and recognise where tangent is undefined.

    • A unit-circle point at angle θ has coordinates (cos θ, sin θ). The signs follow the quadrant, while tangent is the quotient of those coordinates.
    • Obtain exact values from the 30°–60°–90° and 45°–45°–90° triangles. Tangent is undefined when cosine is zero.
    Exact values
    sin⁡π6=12,cos⁡π4=22,tan⁡π3=3\sin\frac\pi6=\frac12,\quad\cos\frac\pi4=\frac{\sqrt2}2,\quad\tan\frac\pi3=\sqrt3
    Unit circle identity and tangent
    sin⁡2θ+cos⁡2θ=1,tan⁡θ=sin⁡θcos⁡θ\sin^2\theta+\cos^2\theta=1,\qquad\tan\theta=\frac{\sin\theta}{\cos\theta}
  • Use identities and double-angle relationships

    Simplify expressions with the Pythagorean and double-angle identities. Choose an equivalent form that helps with the equation rather than changing every expression at once.

    • Use the Pythagorean identity to replace a squared sine or cosine. Choose a double-angle form that reduces the number of different functions in an equation.
    • Dividing by a trigonometric expression can discard solutions where it is zero. Check those values separately and retain only solutions in the required interval.
    Double-angle sine
    sin⁡2θ=2sin⁡θcos⁡θ\sin2\theta=2\sin\theta\cos\theta
    Equivalent double-angle cosine forms
    cos⁡2θ=cos⁡2θ−sin⁡2θ=1−2sin⁡2θ\cos2\theta=\cos^2\theta-\sin^2\theta=1-2\sin^2\theta
    Another cosine form
    cos⁡2θ=2cos⁡2θ−1\cos2\theta=2\cos^2\theta-1
  • Model and solve with trigonometric functions

    Interpret amplitude, period, phase and vertical shift. Solve trigonometric equations on a specified interval, including equations that become quadratic after substitution.

    • For the radian model below, the amplitude is |a|, period 2π/|b| and midline y = d. Determine a phase from a known starting point, not just the maximum value.
    • When solving an equation, identify all base solutions in a full cycle and then account for periodicity. A quadratic substitution must still give an admissible sine or cosine between −1 and 1.
    Periodic model
    y=asin⁡(b(x−c))+d,T=2π∣b∣y=a\sin(b(x-c))+d,\qquad T=\frac{2\pi}{|b|}
    Sine solutions, n an integer
    sin⁡x=sin⁡α ⟹ x=α+2nπ or x=π−α+2nπ\sin x=\sin\alpha\ \Longrightarrow\ x=\alpha+2n\pi\ \text{or}\ x=\pi-\alpha+2n\pi
04

Statistics and probability

27 recommended hours · 7 study skills

Use a probability model deliberately and interpret its result.

  • Evaluate a sample and a data display

    Distinguish populations, samples and variable types. Identify sampling bias, outliers and limitations before using histograms, cumulative frequency curves or box plots to support a conclusion.

    • Distinguish discrete counts from continuous measurements and a population parameter from a sample statistic. Compare random, systematic, stratified, quota and opportunity approaches in their context.
    • In a histogram the area represents frequency: unequal class widths require frequency density. Cumulative-frequency curves give approximate medians and quartiles. An outlier rule flags values for investigation rather than automatically deleting them.
    Histogram frequency density
    density=frequencyclass width\mathrm{density}=\frac{\mathrm{frequency}}{\mathrm{class\ width}}
    Interquartile range and outlier fences
    IQR=Q3−Q1,Q1−1.5IQR, Q3+1.5IQRIQR=Q_3-Q_1,\qquad Q_1-1.5IQR,\ Q_3+1.5IQR
  • Summarise centre and spread

    Calculate and interpret mean, median, quartiles, variance and standard deviation, including grouped-data estimates. Explain how adding or multiplying a constant changes the summary measures.

    • Use frequency weights where observations repeat, and class midpoints for grouped-data estimates. A standard deviation has the original units; a variance has squared units.
    • Adding a constant moves the centre but leaves spread unchanged. Multiplying by a constant scales the standard deviation by its magnitude and variance by its square.
    Mean and population variance
    xˉ=∑fixi∑fi,σ2=∑fi(xi−xˉ)2∑fi\bar x=\frac{\sum f_ix_i}{\sum f_i},\qquad\sigma^2=\frac{\sum f_i(x_i-\bar x)^2}{\sum f_i}
    Linear change of data
    ax+b‾=axˉ+b,σax+b=∣a∣σx\overline{ax+b}=a\bar x+b,\qquad\sigma_{ax+b}=|a|\sigma_x
  • Interpret correlation and both regression directions

    Read a scatter plot and Pearson’s correlation, then use the appropriate regression equation for prediction. Do not confuse correlation with causation or reverse a regression line without checking.

    • Pearson’s r measures the strength and direction of linear association. Its value lies between −1 and 1; a value near zero does not rule out a nonlinear relationship.
    • Use regression of y on x to predict y from x and regression of x on y for the reverse task. Both pass through the centroid; they are generally not algebraic inverses.
    Regression of y on x
    y^−yˉ=rσyσx(x−xˉ)\widehat y-\bar y=r\frac{\sigma_y}{\sigma_x}(x-\bar x)
    Reverse regression
    x^−xˉ=rσxσy(y−yˉ)\widehat x-\bar x=r\frac{\sigma_x}{\sigma_y}(y-\bar y)
  • Organise events and conditional probabilities

    Use sample spaces, Venn diagrams, trees and tables. Apply addition and multiplication rules, distinguish independence from mutual exclusion, and interpret the condition in a conditional probability.

    • Mutually exclusive events have no common outcome; independent events do not change each other’s probability. Non-zero mutually exclusive events are not independent.
    • On a probability tree multiply along a path and add disjoint paths. For a conditional question restrict the sample space to the event after the vertical bar.
    Addition and complement rules
    P(A∪B)=P(A)+P(B)−P(A∩B),P(Ac)=1−P(A)P(A\cup B)=P(A)+P(B)-P(A\cap B),\quad P(A^c)=1-P(A)
    Conditional probability
    P(A∣B)=P(A∩B)P(B)(P(B)>0)P(A\mid B)=\frac{P(A\cap B)}{P(B)}\quad(P(B)>0)
    Independence test
    P(A∩B)=P(A)P(B)P(A\cap B)=P(A)P(B)
  • Describe a discrete random variable

    Build a probability distribution and calculate its expected value. Check that probabilities are valid and add to one before using the distribution.

    • List the possible numerical values of X and their probabilities. Expected value is a long-run weighted average, so it need not be a value a single trial can produce.
    • When a game has a payment or entry fee, define whether X is a payout or a net gain. Subtracting the fee changes expected gain.
    Probability distribution conditions
    0≤pi≤1,∑ipi=10\leq p_i\leq1,\qquad\sum_i p_i=1
    Expected value
    E(X)=∑ixipiE(X)=\sum_i x_ip_i
  • Use a binomial model

    Identify a fixed number of independent trials with a constant success probability. Calculate relevant probabilities and interpret the model’s mean and variance in context.

    • A binomial variable counts successes in n independent Bernoulli trials with the same probability p. Sampling without replacement can violate the independence assumption.
    • Translate at least and more than carefully. Use a cumulative probability and its complement where this saves work.
    Binomial probability
    P(X=k)=(nk)pk(1−p)n−kP(X=k)=\binom nk p^k(1-p)^{n-k}
    Mean and variance
    X∼B(n,p),E(X)=np,Var⁡(X)=np(1−p)X\sim B(n,p),\qquad E(X)=np,\quad\operatorname{Var}(X)=np(1-p)
  • Use a normal model and standardisation

    Find normal probabilities or inverse values with technology and interpret z-scores. Set up equations when an unknown mean or standard deviation must be determined from probability information.

    • A normal model is continuous and symmetric about μ. Its standard deviation σ must be positive; probabilities are areas, so the probability at a single exact value is zero.
    • Use inverse-normal technology for a percentile. Draw the shaded region first when finding an unknown mean or spread from two probability statements.
    Normal notation and standardisation
    X∼N(μ,σ2),Z=X−μσX\sim N(\mu,\sigma^2),\qquad Z=\frac{X-\mu}{\sigma}
    Standardisation of a threshold
    P(X<a)=P ⁣(Z<a−μσ)P(X<a)=P\!\left(Z<\frac{a-\mu}{\sigma}\right)
05

Calculus

28 recommended hours · 7 study skills

Connect a symbolic method with rates, shape and accumulated change.

  • Connect a derivative to a rate and a gradient

    Interpret limiting change, tangent gradient and the derivative function. Use the sign of a derivative to describe where the original function increases or decreases.

    • The derivative is the limit of the gradient of a secant as its input step tends to zero. It describes an instantaneous rate, not an average over a whole interval.
    • Positive derivative means local increase and negative derivative local decrease. A derivative of zero identifies a candidate stationary point but does not on its own classify it.
    Derivative from first principles
    f′(x)=lim⁡h→0f(x+h)−f(x)hf'(x)=\lim_{h\to0}\frac{f(x+h)-f(x)}h
    Average rate over an interval
    f(b)−f(a)b−a\frac{f(b)-f(a)}{b-a}
  • Differentiate the required elementary functions

    Use power, exponential, logarithmic and trigonometric derivatives. Apply the chain, product and quotient rules, showing the function structure before simplifying.

    • Use radians for trigonometric differentiation. Write the inner and outer functions before using the chain rule, and do not drop the inner derivative.
    • For a quotient, keep the numerator order consistent. Simplify only after the derivatives have been formed correctly.
    Power, exponential and logarithm
    ddxxn=nxn−1,ddxex=ex,ddxln⁡x=1x\frac{d}{dx}x^n=nx^{n-1},\quad\frac{d}{dx}e^x=e^x,\quad\frac{d}{dx}\ln x=\frac1x
    Trigonometric derivatives
    (sin⁡x)′=cos⁡x,(cos⁡x)′=−sin⁡x(\sin x)'=\cos x,\qquad(\cos x)'=-\sin x
    General exponential derivative, a > 0
    ddxax=axln⁡a\frac{d}{dx}a^x=a^x\ln a
    Product, quotient and chain rules
    (uv)′=u′v+uv′,(uv)′=u′v−uv′v2(uv)'=u'v+uv',\quad\left(\frac uv\right)'=\frac{u'v-uv'}{v^2}
    Chain rule
    ddxf(g(x))=f′(g(x))g′(x)\frac{d}{dx}f(g(x))=f'(g(x))g'(x)
  • Find tangents, normals and second derivatives

    Evaluate a gradient at the correct input and form a line equation. Use a second derivative to describe curvature and connect the graphs of a function and its derivatives.

    • Substitute the input into f to find the point and into f′ to find the tangent gradient. A normal is perpendicular to that tangent.
    • The second derivative describes how gradient changes. If f′ is zero, a positive f″ gives a local minimum and a negative f″ gives a local maximum; zero is inconclusive.
    Tangent at x = a
    y−f(a)=f′(a)(x−a)y-f(a)=f'(a)(x-a)
    Normal gradient, if f′(a) ≠ 0
    mnormal=−1f′(a)m_{\rm normal}=-\frac1{f'(a)}
    Second derivative
    f′′(x)=ddxf′(x)f''(x)=\frac{d}{dx}f'(x)
  • Justify extrema and optimisation

    Find stationary points, classify them and consider boundaries where relevant. Explain the meaning of an optimum and check that it lies in the allowed domain.

    • Translate the constraint into a single-variable objective and state its domain. Find stationary candidates and check endpoints where the interval includes them.
    • A change of sign of f′ classifies a turning point. An inflection requires a change in concavity; f″ = 0 alone is insufficient.
    Stationary-point condition
    f′(x)=0f'(x)=0
    Second-derivative classification at a stationary point
    f′′(a)>0⇒local minimum,f′′(a)<0⇒local maximumf''(a)>0\Rightarrow\text{local minimum},\quad f''(a)<0\Rightarrow\text{local maximum}
  • Distinguish position, velocity and distance

    Differentiate or integrate a motion model with consistent units. Separate signed displacement from total distance and account for a change of direction.

    • Velocity is signed: its sign describes direction relative to the chosen positive axis. Speed is the magnitude of velocity.
    • Integrating velocity gives displacement. Split the interval at relevant zeros of velocity or integrate speed to obtain distance travelled.
    Motion derivatives
    v(t)=s′(t),a(t)=v′(t)=s′′(t)v(t)=s'(t),\qquad a(t)=v'(t)=s''(t)
    Displacement and distance
    Δs=∫abv(t) dt,D=∫ab∣v(t)∣ dt\Delta s=\int_a^b v(t)\,dt,\qquad D=\int_a^b|v(t)|\,dt
  • Find and interpret antiderivatives

    Integrate the required powers, reciprocal and exponential forms and suitable linear composites. Use an initial condition to find an integration constant and explain what it represents.

    • An indefinite integral represents a family of antiderivatives, so include a constant. Use a supplied point or initial value to determine it.
    • For a linear argument ax + b, compensate for its derivative a. Differentiate your answer to check both the coefficient and the original domain.
    Power integral, n ≠ −1
    ∫xn dx=xn+1n+1+C\int x^n\,dx=\frac{x^{n+1}}{n+1}+C
    Reciprocal and exponential integrals
    ∫1x dx=ln⁡∣x∣+C,∫eax+b dx=1aeax+b+C (a≠0)\int\frac1x\,dx=\ln|x|+C,\qquad\int e^{ax+b}\,dx=\frac1a e^{ax+b}+C\ (a\ne0)
    Trigonometric antiderivatives
    ∫cos⁡x dx=sin⁡x+C,∫sin⁡x dx=−cos⁡x+C\int\cos x\,dx=\sin x+C,\qquad\int\sin x\,dx=-\cos x+C
  • Calculate definite integrals and areas

    Use exact integration or technology as directed. Find intersections and split an interval where needed so that geometric area is not confused with a signed integral.

    • The fundamental theorem connects a definite integral with an antiderivative. Evaluate the upper-bound value minus the lower-bound value.
    • For geometric area between two curves, determine which is above the other and split at intersections if their order changes. Areas must be non-negative.
    Fundamental theorem
    ∫abf(x) dx=F(b)−F(a)(F′=f)\int_a^b f(x)\,dx=F(b)-F(a)\quad(F'=f)
    Area between curves
    A=∫ab∣f(x)−g(x)∣ dxA=\int_a^b|f(x)-g(x)|\,dx

The topic hours total 120. A further 30 hours support inquiry, problem solving, modelling and the exploration, giving 150 hours overall. This is recommended course time, not a revision timetable or an exam-weighting table.

KNOW THE TASK BEFORE PRACTISING

AA SL assessment and calculator rules

These figures describe the current course. The written papers contribute 80% and the mathematical exploration contributes 20%. Check the 2029 changes if you are preparing for the revised course.

Current IB Math AA SL written assessment
ComponentTimeMarksWeightCalculator / task
Paper 190 minutes8040%Not permitted
Short and extended responses
Paper 290 minutes8040%Required
Short and extended responses
Exploration / IACoursework2020%Your own mathematical investigation

For Paper 1, practise exact values, symbolic manipulation and a complete written method. For the technology papers, choose a useful graph window and connect a numerical result to the setup you wrote. Use the permitted-model and exam-mode instructions supplied by your school. A formula booklet is available in the written examinations, but recognising a formula does not replace selecting and justifying a method.

TRY A PIECE OF THE MATHEMATICS

Connect an exact derivative to a turning point

For f(x) = x³ − 3x, find the stationary points and classify them without a calculator.

Show the worked explanation
  1. Differentiate: f′(x) = 3x² − 3. Solving f′(x) = 0 gives x = −1 and x = 1.
  2. Find the original function values: f(−1) = 2 and f(1) = −2. The points are (−1, 2) and (1, −2).
  3. Use f″(x) = 6x. At −1 it is negative, so there is a local maximum; at 1 it is positive, so there is a local minimum.

Check the reasoning: Solving a derivative gives inputs, not complete points. Substitute back into the original function and justify the classification.

Try a fresh version

Try g(x) = x³ − 12x. Its stationary points are (−2, 16), a local maximum, and (2, −16), a local minimum. Show the reasoning before checking the coordinates.

Original OnlyPrepy practice example. It is not an official IB examination question or mark scheme.

REVIEW THE DECISIONS BEHIND YOUR ANSWERS

Where AA SL Students Lose Marks

An AA SL solution can start with the right idea and still lose accuracy or reasoning along the way. Use these checks when reviewing your own working, especially on the non-calculator paper.

Losing a solution during algebra

Dividing an equation by x can remove the case x = 0. Squaring both sides can also introduce answers that do not satisfy the original equation.

What to practise: Write restrictions before rearranging, keep any zero case separately and substitute every candidate into the original equation.

Mixing exact values, rounding and angle modes

A rounded decimal can spoil an exact trigonometric result. Using degree mode in a radian question changes the answer even when the formula is correct.

What to practise: Keep fractions and standard-angle values exact when required. State the angle unit and retain unrounded calculator values until the final answer.

Finding a stationary input but not answering the question

Solving f′(x) = 0 gives candidate inputs. It does not supply coordinates, classify a turning point or show that an optimum is feasible.

What to practise: Find the corresponding function values, justify the classification and compare relevant boundaries. Give the contextual optimum with its units.

Treating signed accumulation as distance or area

A definite integral can be negative or allow positive and negative contributions to cancel. Total distance and geometric area cannot be negative.

What to practise: Sketch the relevant graph, locate direction changes or intersections and split the interval before adding positive contributions.

Giving a calculator result without a mathematical setup

An intersection, normal probability or regression prediction can be difficult to interpret if the equation, event or response variable is missing.

What to practise: Write the equation or probability statement first. Use the correct regression direction and finish with a statement about the original quantities.

When you review a question, label the first error as a concept, method, accuracy or interpretation issue. Correct that step, then attempt a fresh question before reading its solution.

MAKE STRONGER ANSWERS REPEATABLE

What Separates a 5 from a 7 in AA SL

For AA SL, working towards a 7 means making familiar methods dependable and then connecting them in less familiar problems. Use the contrasts below to improve a response, rather than simply attempting more questions.

These are practice targets, not official grade boundaries. Your final grade depends on the assessed work and the boundaries for your examination session.

Developing stronger AA SL responses
SkillA habit to improveA stronger response
Algebra and functionsA familiar rearrangement works, but restrictions or alternative forms are overlooked.Choose a useful form, preserve the domain and verify the result using the original expression or graph.
TrigonometryA formula gives one plausible angle.Explain the selected rule, retain exact values where appropriate and find every solution in the specified interval.
CalculusDifferentiate correctly but leave the meaning of the result unexplained.Connect the derivative, function graph and context; justify extrema and distinguish displacement from distance.
Multi-part questionsTreat each part as a separate exercise.Recognise when an earlier result supplies a parameter, factor or argument needed later and use it explicitly.
Communication and checkingGive a final number with little working or a vague conclusion.Show the decisive steps, check signs and scale, and answer with the requested precision, notation and units.

Check your independence

Try an unfamiliar optimisation question after a gap. Can you define the variable, build the constraint, justify the optimum and explain it without looking at a model solution? Record the first decision you could not make independently.

FEEDBACK YOU CAN USE IN YOUR NEXT ATTEMPT

How Tutoring Helps in AA SL

AA SL tutoring can give you feedback on the reasoning between your first line and your final answer. Bring your own attempt so the session can address the point where your method breaks down.

  1. Diagnose the first uncertain step

    Work through a short mix of algebra, functions, trigonometry and calculus. Identify whether an error comes from the concept, a manipulation or the interpretation of the question.

  2. Build Paper 1 independence

    Explain exact algebra and trigonometric steps aloud, then attempt a similar problem with less prompting. Check restrictions and the reasons for each transformation.

  3. Use Paper 2 technology deliberately

    Practise a graph, regression or distribution task on your own calculator while keeping a written setup. Explain what the output means and whether its size is plausible.

  4. Turn feedback into independent practice

    Choose a small follow-up set around the diagnosed skill, revisit it after a gap and then try a mixed question. Keep an error log that records the decision to change.

What to bring to a session

For example, bring an optimisation attempt, your calculator and the steps you were unsure about. A useful session rebuilds the model, checks the derivative and boundaries, then ends with a fresh question for you to solve independently.

For exploration support, bring your own question, reasoning and draft working. Guidance should help you make and explain your own mathematical decisions; your assessed submission must remain your own.

Explore IB tutoring or discuss AA SL support. Include your course, exam session and the specific skill or question you want to work on.

INVESTIGATE A QUESTION OF YOUR OWN

The mathematical exploration in AA SL

The internal assessment, often called the IA, is an individual mathematical exploration worth 20%. Choose a focused question that lets you explain mathematics you understand. A manageable investigation with thoughtful decisions is more useful than a collection of advanced calculations you cannot justify.

For the current course, the five criteria total 20 marks. The Use of mathematics criterion has level-specific expectations; using an impressive technique without understanding it does not establish that those expectations are met.

  • Presentation4 marks
  • Mathematical communication4 marks
  • Personal engagement3 marks
  • Reflection3 marks
  • Use of mathematics6 marks

Make the investigation yours

Explain the mathematical choices, assumptions and connections that drive your argument. Check an algebraic result against another representation, and reflect on what the result does and does not show. Keep sources and intermediate work so the development of your reasoning is clear.

Follow your school’s current academic-integrity policy. Guidance can help you understand requirements, plan a method or reflect on your reasoning; a tutor must not produce or rewrite your assessed submission. The revised 2029 course uses different criteria, outlined below.

FROM A TOPIC LIST TO A NEXT STEP

Build a practical AA SL revision routine

  1. Practise exact algebra and standard trigonometric values for Paper 1, then explain each line of a solution.
  2. Use your own graphing calculator for Paper 2 tasks: intersections, numerical integrals, normal probabilities and regression.
  3. Combine functions with calculus after practising each separately. Keep an error log that names the first incorrect step.

Use a short review cycle

Choose one checklist skill and attempt a fresh question without its solution. Keep your original working, identify the first point where your reasoning breaks down and practise that step. Return to the idea in another question after a gap, then combine it with related topics.

Use a weekly study plan to make room for this cycle, and an exam-error log to record the decision you want to improve. Practise with the IB Math AA SL May 2026 papers solved step by step. If you need guided practice, explore IB tutoring and include your exact course, level and examination session.

FIRST TEACHING AUGUST 2027 · FIRST ASSESSMENT MAY 2029

What changes for AA SL in 2029?

The current checklist above must not be treated as the complete revised syllabus. IB has published the following changes and a revised subject brief. Students taking the current course through November 2028 should continue to prepare its required content.

  • Financial applications and bivariate data are removed from the revised course.
  • Paper 1 and Paper 2 each reduce from 80 to 75 marks; each remains 90 minutes and 40% of the final grade.
  • The exploration keeps its 20% weighting but uses the revised inquiry-based assessment criteria.
Recommended topic hours: current and first-assessment-2029 AA SL
Study areaCurrentFrom 2029
Number and algebra1919
Functions2133
Geometry and trigonometry2516
Statistics and probability2722
Calculus2830
Inquiry and exploration3030

IB reorganises the revised content under its updated topic labels; the table groups comparable areas for orientation. Hours are teaching recommendations. They do not specify the percentage of exam marks.

Revised exploration criteria

From first assessment 2029, the exploration uses four criteria at both levels: Problem specification (4), Abstraction (6), Computation (4) and Interpretation (6). Use the appropriate criteria for your own session rather than combining them with the current five-criterion scheme.

Confirm the revised course requirements and assessment criteria with your teacher before planning for your new examination session.

CHOOSE THE MATHEMATICS YOU WANT TO STUDY

AA SL vs the other IB math courses

Start with your interests, current foundations and future course requirements. AA and AI study mathematics with different emphases. HL adds substantial breadth and depth; calculator access does not make AI an easier version of AA.

All four courses at a glance · current course through November 2028
CourseMathematical focusTime and assessmentWho might prefer it?
AA SLYou are hereAlgebraic reasoning, functions and calculus with exact methods.150 hours · 2 written papers
Paper 1 without a calculator; calculator required for remaining papers.
Exploration: 20%.
You enjoy understanding how an algebraic method works and want a standard-level course with substantial symbolic practice.
AA HLDeeper proof, complex numbers, vectors and calculus alongside the shared AA foundations.240 hours · 3 written papers
Paper 1 without a calculator; calculator required for remaining papers.
Exploration: 20%.
You enjoy abstract problems and sustained mathematical arguments, and are ready to give a higher-level course regular practice time.
AI SLData, practical models, statistical interpretation and technology-supported decisions.150 hours · 2 written papers
Calculator required for every written paper.
Exploration: 20%.
You prefer interpreting mathematics in context and want a standard-level course built around modelling and data.
AI HLAdvanced modelling and statistics, matrices, networks and differential equations.240 hours · 3 written papers
Calculator required for every written paper.
Exploration: 20%.
You enjoy data-rich problems and using technology to investigate substantial mathematics, and can commit to higher-level depth.

Is AA SL a good fit for you?

You enjoy understanding how an algebraic method works and want a standard-level course with substantial symbolic practice.

Useful starting strengths: Comfort with algebra, function graphs and showing working without a calculator. You can develop these skills through practice; discuss your current readiness and the full Diploma workload with your teacher.

AA SL or AA HL?

Choose AA HL instead if you want the additional proof, complex numbers, vectors and deeper calculus and can sustain the higher-level workload. AA SL has 150 recommended hours; AA HL has 240.

See the AA HL topics and paper rules →

AA SL or AI SL?

Consider AI SL if interpreting data and building practical models interests you more than exact symbolic work. Both are SL, but AI uses a calculator in both written papers and adds statistical testing and Voronoi work.

See the AI SL topics and paper rules →

AA SL or AI HL?

Consider AI HL if advanced statistics, matrices, networks and modelling are your main interests. Moving from AA SL to AI HL changes both the course emphasis and the level; it is not just adding calculator use.

See the AI HL topics and paper rules →

Make the choice in this order

  1. Check your intended destinations. Read the exact mathematics subject, level and grade required for each university programme and entry year. Do this before choosing a course on the basis of a career label.
  2. Try the actual style. Work through sample algebra and reasoning problems alongside modelling and data questions. Notice which explanations interest you and where your foundations need work.
  3. Plan the workload. Discuss HL subjects, school availability, support and study time with your teacher or Diploma coordinator. HL recommends 90 more hours than SL, alongside deeper content.
  4. Confirm the cohort. For assessment in 2029 or later, use the revised guide. Course choice and university recognition need to be checked against the requirements for your own year.

Neither an interest in engineering nor an interest in business selects a mathematics course by itself. Requirements vary by institution and programme; this comparison does not promise admission or equivalence.

A LITTLE MORE CLARITY

AA SL syllabus questions

Check your course, exam session and next practice step.

Tell us about your needs
What does the IB Math AA SL syllabus cover?

IB Math AA SL studies number and algebra, functions, geometry and trigonometry, statistics and probability, and calculus, alongside the mathematical exploration. The checklist groups the current SL content into practical study skills.

Can I use a calculator in AA SL?

Paper 1 does not permit a calculator. A graphic display calculator is required for Paper 2. Check your school’s current permitted-model and exam-mode instructions.

How many written papers are there in AA SL?

There are two 90-minute written papers, each worth 40%, plus the mathematical exploration worth 20%. Use the assessment table for the course-specific question style and calculator rules.

Is this the AA SL syllabus for 2029?

The detailed checklist covers the current course, whose final assessment is November 2028. The separate 2029 section summarises published changes, not the complete revised guide. Match the syllabus to your assessment session and confirm it with your teacher.

How is AA SL different from AI SL?

AA gives particular emphasis to algebraic structure, exact methods and mathematical argument, including a non-calculator paper. AI emphasises modelling, statistical interpretation and technology. Both include calculus; check the actual subject and level required by a university course.

Are the topic hours the percentages of marks on the exam?

No. They are recommended teaching hours, not a guaranteed distribution of exam marks. A question can link several topics. Keep a balanced practice plan instead of using the hours to predict which questions will appear.

Does checking a skill mean I have mastered it?

No. A checkmark records that you reviewed a skill on this browser. Test your understanding with a fresh question, explain your reasoning and revisit it after a gap. The checklist is not a score prediction.

Can I get guidance with my mathematical exploration?

You can ask for help understanding the criteria, planning a method and reflecting on your own reasoning. Follow your school’s academic-integrity rules. The investigation and submitted writing must remain your own.