IB DIPLOMA · HIGHER LEVEL

IB Math AA HL
Syllabus

Connect the SL foundations with proof, complex numbers, vectors and deeper calculus. This AA HL map separates the shared starting points from the additional higher-level work.

Mathematics: Analysis and Approaches HL

WHAT THIS COURSE ASKS OF YOU

How to approach AA HL

AA HL requires more than faster SL calculations. You need to choose between representations, justify a technique and sustain an argument when a problem combines several topics. Practise explaining why a method works, including when technology is available.

This is an independent study guide, not the official IB syllabus document. Skills are grouped in plain language so you can plan practice; the group numbers are not IB subtopic codes. Use the official guide and your teacher’s directions for the full requirements and prior learning.

Work through the shared foundations as well as the entries marked Additional HL. An HL extension often uses several earlier ideas, so a secure explanation of a basic step still matters.

CURRENT COURSE · THROUGH NOVEMBER 2028

Your AA HL topic checklist

Choose one skill, try a question and explain the decision behind your answer.

57 study skills across five topic areas.

01

Number and algebra

39 recommended hours · 13 study skills

Extend SL algebra into proof, complex structure and alternative representations.

  • Write and calculate with powers of ten

    Move between ordinary numbers and scientific notation. Keep the coefficient and exponent meaningful when estimating an answer or checking its size.

    • Write the coefficient between 1 inclusive and 10 exclusive in magnitude for a non-zero number. A negative exponent represents a small magnitude, not a negative number.
    • When multiplying, multiply coefficients and add exponents; when adding, first express both quantities using the same power of ten.
    Scientific notation
    a×10k(1≤∣a∣<10, k∈Z)a\times10^k\quad(1\leq |a|<10,\ k\in\mathbb Z)
  • Build arithmetic sequences and sums

    Find a common difference, express a general term and total a finite sequence. Read and write sigma notation, including a starting index that is not one.

    • Here u₁ is the first term, d the common difference and n a positive integer. Find d by subtracting consecutive terms.
    • Expand the first few terms of a sigma expression to check its lower limit. An arithmetic sum is the number of terms multiplied by their average.
    Term and finite sum
    un=u1+(n−1)du_n=u_1+(n-1)d
    Two equivalent sum forms
    Sn=n2(2u1+(n−1)d)=n2(u1+un)S_n=\frac n2(2u_1+(n-1)d)=\frac n2(u_1+u_n)
    Sigma notation
    Sn=∑k=1nukS_n=\sum_{k=1}^{n}u_k
  • Work with geometric growth and decay

    Identify a constant ratio, calculate terms and finite sums, and model repeated percentage changes. Distinguish a one-off percentage increase from repeated compounding.

    • For a geometric sequence divide a term by its predecessor to identify r. The finite-sum formula below assumes r ≠ 1; if r = 1, the sum is nu₁.
    • For compound interest, P is principal, R is the nominal annual percentage rate, k the number of compounding periods per year and t the number of years. Depreciation uses a multiplier below one.
    Geometric term and sum
    un=u1rn−1,Sn=u1(1−rn)1−ru_n=u_1r^{n-1},\qquad S_n=\frac{u_1(1-r^n)}{1-r}
    Compound interest
    A=P(1+R100k)ktA=P\left(1+\frac{R}{100k}\right)^{kt}
  • Decide whether an infinite geometric sum exists

    Check the size of the common ratio before finding a sum to infinity. Explain why the condition on the ratio matters rather than applying a formula to every sequence.

    • The terms and the uncounted tail must tend to zero. This happens for a geometric series only when the magnitude of r is less than one.
    • A negative ratio can converge too: its terms alternate in sign. A ratio of 1 or −1 does not satisfy the convergence condition.
    Convergent geometric sum
    S∞=u11−r,∣r∣<1S_\infty=\frac{u_1}{1-r},\qquad |r|<1
  • Use indices and logarithms

    Simplify rational powers and logarithmic expressions, change logarithm bases and solve exponential equations. Check that every logarithm has a valid argument.

    • For real logarithms the argument must be positive, the base positive and the base different from one. The logarithm of a sum does not split into a sum of logarithms.
    • Use a common base or take logarithms to isolate an unknown exponent. Check any candidate solution in the original equation.
    Index laws
    aman=am+n,(am)n=amna^ma^n=a^{m+n},\qquad (a^m)^n=a^{mn}
    Logarithm laws
    log⁡a(xy)=log⁡ax+log⁡ay\log_a(xy)=\log_a x+\log_a y
    Powers and change of base
    log⁡a(xr)=rlog⁡ax,log⁡ax=ln⁡xln⁡a\log_a(x^r)=r\log_a x,\qquad\log_a x=\frac{\ln x}{\ln a}
  • Expand a positive-integer binomial

    Use combinations or Pascal’s triangle to select a coefficient or term in a binomial expansion. Keep the power of each factor attached to its coefficient.

    • For a non-negative integer n the expansion has n + 1 terms. In term k + 1, the power of a is n − k and the power of b is k.
    • To find a specific coefficient, include any sign or numerical factor inside b. Distinguish a term’s position from its exponent.
    Binomial expansion
    (a+b)n=∑k=0n(nk)an−kbk(a+b)^n=\sum_{k=0}^{n}\binom nk a^{n-k}b^k
    Combination coefficient
    (nk)=n!k!(n−k)!\binom nk=\frac{n!}{k!(n-k)!}
  • Write a short deductive argument

    Start from a stated assumption or known result and justify each algebraic step. Distinguish proving an identity from checking a few numerical examples.

    • State which numbers the claim concerns and start from definitions or an established identity. A numerical check may reveal an error but does not prove a universal statement.
    • For an identity, transform one side into the other using justified equalities. Division by a potentially zero expression requires a separate case.
    Example: sum of consecutive integers
    n+(n+1)=2n+1(n∈Z)n+(n+1)=2n+1\quad(n\in\mathbb Z)
  • Count selections and arrangements

    Additional HL

    Choose between permutations and combinations and explain whether order matters. Extend the binomial expansion to negative or fractional powers with the appropriate validity restriction.

    • Use permutations for ordered selections and combinations when order is irrelevant. Factorials count arrangements of distinct objects; repeated objects require adjustment.
    • For a non-integer exponent, the standard expansion about zero below is an infinite series valid for |x| < 1. Retain the order requested in an approximation.
    Counting formulas
    nPr=n!(n−r)!,(nr)=n!r!(n−r)!{}^nP_r=\frac{n!}{(n-r)!},\qquad\binom nr=\frac{n!}{r!(n-r)!}
    Generalised binomial series
    (1+x)α=1+αx+α(α−1)2!x2+⋯(1+x)^\alpha=1+\alpha x+\frac{\alpha(\alpha-1)}{2!}x^2+\cdots
  • Decompose a rational expression

    Additional HL

    Resolve the required proper or improper rational forms into partial fractions. Recombine the pieces to check an algebraic decomposition before using it in an integral.

    • If the numerator degree is at least the denominator degree, perform polynomial division first. Factor the remaining denominator before choosing the decomposition.
    • A repeated linear factor requires a term for every power up to its multiplicity. Multiply through by the denominator and compare coefficients or substitute useful values.
    Distinct linear factors
    px+q(x−a)(x−b)=Ax−a+Bx−b(a≠b)\frac{px+q}{(x-a)(x-b)}=\frac A{x-a}+\frac B{x-b}\quad(a\ne b)
    Repeated factor pattern
    px+q(x−a)2=Ax−a+B(x−a)2\frac{px+q}{(x-a)^2}=\frac A{x-a}+\frac B{(x-a)^2}
  • Represent and operate on complex numbers

    Additional HL

    Move between Cartesian, polar and exponential forms. Use conjugates, moduli and arguments, and interpret addition or multiplication geometrically on an Argand diagram.

    • For z = a + bi, the modulus is its distance from the origin and an argument its angle from the positive real axis. Choose the correct quadrant.
    • Complex conjugates change the sign of the imaginary part. Multiply by a conjugate to make a quotient’s denominator real.
    Cartesian data
    z‾=a−bi,∣z∣=a2+b2,zz‾=∣z∣2\overline z=a-bi,\qquad |z|=\sqrt{a^2+b^2},\qquad z\overline z=|z|^2
    Polar and exponential form
    z=r(cos⁡θ+isin⁡θ)=reiθz=r(\cos\theta+i\sin\theta)=re^{i\theta}
    Multiplication in polar form
    r1eiθ1r2eiθ2=r1r2ei(θ1+θ2)r_1e^{i\theta_1}r_2e^{i\theta_2}=r_1r_2e^{i(\theta_1+\theta_2)}
  • Find complex powers and roots

    Additional HL

    Use De Moivre’s theorem and the relationship between roots of real-coefficient polynomials. Include all required roots and explain their spacing in the complex plane.

    • For a non-zero complex number the n distinct nth roots lie equally spaced on a circle of radius r^(1/n). List k from 0 through n − 1.
    • Non-real roots of a polynomial with real coefficients occur in conjugate pairs. This statement depends on the coefficients being real.
    De Moivre’s theorem
    [r(cos⁡θ+isin⁡θ)]n=rn(cos⁡nθ+isin⁡nθ)[r(\cos\theta+i\sin\theta)]^n=r^n(\cos n\theta+i\sin n\theta)
    All nth roots
    wk=r1/nei(θ+2kπ)/n,k=0,…,n−1w_k=r^{1/n}e^{i(\theta+2k\pi)/n},\quad k=0,\ldots,n-1
  • Select a proof method

    Additional HL

    Construct induction and contradiction arguments, or disprove a claim with a counterexample. Make the induction hypothesis and the step that uses it explicit.

    • For induction, prove the first required case, state the proposition for an arbitrary k, and use that hypothesis to establish the k + 1 case.
    • For contradiction assume the negation of the claim and reach an impossibility. One valid counterexample disproves a universal claim; several supporting examples do not prove it.
    Structure of induction
    P(n0),P(k)⇒P(k+1)(k≥n0)P(n_0),\qquad P(k)\Rightarrow P(k+1)\quad(k\geq n_0)
    Example statement to prove
    1+2+⋯+n=n(n+1)21+2+\cdots+n=\frac{n(n+1)}2
  • Classify simultaneous-equation systems

    Additional HL

    Solve systems with up to three unknowns and distinguish a unique solution, no solution and infinitely many solutions. Interpret a parameter or a dependent equation carefully.

    • Eliminate variables systematically and retain any restrictions introduced when dividing by a parameter. Substitution into all original equations checks consistency.
    • A contradiction such as 0 = 1 means no solution. An identity such as 0 = 0 indicates a dependent equation; assess the remaining independent equations before stating how many free variables remain.
    Three-variable system
    aix+biy+ciz=di,i=1,2,3a_ix+b_iy+c_iz=d_i,\qquad i=1,2,3
02

Functions

32 recommended hours · 11 study skills

Explain why a graph has its shape, including less familiar transformations.

  • Connect a line to its equation

    Find gradients, intercepts and equations of lines; recognise parallel and perpendicular relationships. Relate an equation to the quantities and units on its axes.

    • Gradient is change in the vertical coordinate divided by change in the horizontal coordinate. A vertical line has equation x = c and no finite gradient.
    • Parallel non-vertical lines have equal gradients; perpendicular finite gradients multiply to −1. Handle a horizontal/vertical pair separately.
    Gradient and point-gradient form
    m=y2−y1x2−x1,y−y1=m(x−x1)m=\frac{y_2-y_1}{x_2-x_1},\qquad y-y_1=m(x-x_1)
    Slope-intercept form
    y=mx+cy=mx+c
  • Read domain, range and function notation

    Evaluate functions and identify allowed inputs and possible outputs. Explain why a mathematical expression may need a smaller domain when it models a real situation.

    • Function notation f(a) means the output at input a. The domain lists permitted inputs; the range lists the outputs actually attained.
    • Exclude zero denominators and negative radicands of real square roots. Context can impose further bounds, such as time being non-negative.
    Example with a domain restriction
    f(x)=1x−2,x∈R∖{2}f(x)=\frac1{x-2},\qquad x\in\mathbb R\setminus\{2\}
  • Compose and invert functions

    Track the order in a composition and find an inverse where it exists. Use a suitable domain restriction and check the result by composition or a graph.

    • In f ∘ g, apply g first, then f. Inputs must belong to the domain of g and give outputs accepted by f.
    • An inverse reverses the mapping and is reflected in y = x. A function must be one-to-one on its chosen domain to have an inverse function.
    Composition and inverse checks
    (f∘g)(x)=f(g(x)),f−1(f(x))=x(f\circ g)(x)=f(g(x)),\qquad f^{-1}(f(x))=x
    Quadratic inverse after restriction
    f(x)=x2, x≥0⟹f−1(x)=xf(x)=x^2,\ x\geq0\quad\Longrightarrow\quad f^{-1}(x)=\sqrt x
  • Move between quadratic forms

    Use expanded, factorised and vertex forms to find intercepts, roots and turning points. Solve quadratic equations or inequalities and interpret the discriminant.

    • Factorised form reveals roots; completing the square reveals the vertex. The coefficient a controls concavity and vertical scale.
    • For real coefficients, a positive discriminant gives two distinct real roots, zero a repeated root and a negative value no real roots. Use a sign chart when solving inequalities.
    Three quadratic forms
    f(x)=ax2+bx+c=a(x−r1)(x−r2)=a(x−h)2+kf(x)=ax^2+bx+c=a(x-r_1)(x-r_2)=a(x-h)^2+k
    Roots and discriminant
    x=−b±b2−4ac2a,Δ=b2−4acx=\frac{-b\pm\sqrt{b^2-4ac}}{2a},\qquad\Delta=b^2-4ac
  • Sketch reciprocal and rational functions

    Identify excluded inputs and horizontal or vertical asymptotes in the SL rational forms. Use those features to check the shape of a graph.

    • For the transformed reciprocal below, the centre is (h, k), the vertical asymptote x = h and the horizontal asymptote y = k.
    • For a linear-over-linear rational function, first identify denominator zeros. Check whether a common factor cancels: an excluded input remains excluded even if the expression simplifies.
    Reciprocal transformation
    y=ax−h+k(a≠0)y=\frac{a}{x-h}+k\quad(a\ne0)
    Linear rational form
    y=ax+bcx+d(cx+d≠0)y=\frac{ax+b}{cx+d}\quad(cx+d\ne0)
  • Interpret exponential and logarithmic graphs

    Connect growth or decay to an equation and recognise inverse relationships. Use algebra or a graph to solve an equation and check its solution.

    • For a positive base b different from one, exponential and logarithmic functions are inverses. Exponential growth has b > 1; decay has 0 < b < 1.
    • The basic exponential has positive outputs and a horizontal asymptote; the basic logarithm has positive inputs and a vertical asymptote. Transformations can move these features.
    Inverse relationship
    y=bx⟺x=log⁡byy=b^x\quad\Longleftrightarrow\quad x=\log_b y
    Natural-base model
    y=Aekxy=Ae^{kx}
  • Describe a sequence of graph transformations

    Apply translations, reflections and horizontal or vertical stretches. Explain the effect on a particular point rather than relying on a memorised sketch alone.

    • A change outside f affects outputs; a change inside affects inputs. A horizontal stretch factor is reciprocal to the multiplier of x.
    • Track a known point through the transformation and check the order. A negative vertical scale reflects in the x-axis; a negative horizontal scale reflects in the y-axis.
    A general transformed graph
    g(x)=af(b(x−h))+k(a,b≠0)g(x)=a f(b(x-h))+k\quad(a,b\ne0)
    Point mapping
    (x,y)⟼(h+xb, k+ay)(x,y)\longmapsto\left(h+\frac xb,\ k+ay\right)
  • Solve equations with a suitable method

    Choose exact algebra, a graphical intersection or numerical technology according to the task. State the answer with the accuracy and domain the question requires.

    • An intersection of y = f(x) and y = g(x) gives a solution of f(x) = g(x). A zero of f − g expresses the same problem.
    • For inequalities, identify boundary values and test intervals. Squaring or multiplying by an expression of unknown sign can change a solution set, so verify the result.
    Graphical or algebraic equation setup
    f(x)=g(x)⟺f(x)−g(x)=0f(x)=g(x)\quad\Longleftrightarrow\quad f(x)-g(x)=0
  • Analyse polynomial structure

    Additional HL

    Use factor and remainder theorems, repeated roots and root relationships to connect a polynomial equation with its graph. Check the leading term and end behaviour.

    • The remainder on division by x − a equals f(a), so f(a) = 0 establishes a linear factor. A repeated root changes how the graph meets the axis.
    • For ax³ + bx² + cx + d with non-zero a, use coefficient comparison to connect root sums and products to the coefficients. Keep multiplicities when counting roots.
    Factor and remainder relationship
    f(x)=(x−a)q(x)+f(a)f(x)=(x-a)q(x)+f(a)
    Cubic root relationships
    α+β+γ=−ba,αβ+βγ+γα=ca,αβγ=−da\alpha+\beta+\gamma=-\frac ba,\quad\alpha\beta+\beta\gamma+\gamma\alpha=\frac ca,\quad\alpha\beta\gamma=-\frac da
  • Study higher rational and modulus graphs

    Additional HL

    Find oblique as well as horizontal or vertical asymptotes. Analyse the prescribed rational forms and graphs involving absolute values, reciprocals or squares of functions.

    • Polynomial division separates a rational function into a polynomial part and a remainder term; the latter can tend to zero at large input.
    • For |f(x)| reflect negative outputs above the axis; for f(|x|) reflect the right half into the left. Squaring outputs preserves zeros but changes other heights.
    An oblique-asymptote form
    f(x)=mx+c+r(x)q(x),r(x)q(x)→0f(x)=mx+c+\frac{r(x)}{q(x)},\qquad\frac{r(x)}{q(x)}\to0
    Modulus definition
    ∣u∣={uu≥0−uu<0|u|=\begin{cases}u&u\geq0\\-u&u<0\end{cases}
  • Use symmetry and restrict inverse domains

    Additional HL

    Identify odd, even and self-inverse behaviour and choose an inverse domain deliberately. Solve function inequalities by linking signs, intersections and graphical information.

    • Even graphs are symmetric about the y-axis; odd graphs have rotational symmetry about the origin. Test the defining equation on the full domain.
    • A self-inverse function is its own inverse on the relevant domain. For a rational inequality, use zeros and excluded inputs as sign-chart boundaries.
    Even, odd and self-inverse tests
    f(−x)=f(x),f(−x)=−f(x),f(f(x))=xf(-x)=f(x),\qquad f(-x)=-f(x),\qquad f(f(x))=x
03

Geometry and trigonometry

51 recommended hours · 11 study skills

Move confidently between a geometric configuration and a vector argument.

  • Use coordinates and measurements in space

    Calculate distances and midpoints in three dimensions and work with lengths, areas and volumes of solids. Draw a clear diagram before choosing a triangle.

    • Use the perpendicular coordinate differences as the legs of a three-dimensional right-triangle argument. The midpoint averages each coordinate separately.
    • For composite solids, identify shared or hidden faces before adding surface areas. A cone’s slant height is different from its perpendicular height.
    Distance in three dimensions
    d=(x2−x1)2+(y2−y1)2+(z2−z1)2d=\sqrt{(x_2-x_1)^2+(y_2-y_1)^2+(z_2-z_1)^2}
    Midpoint
    M=(x1+x22,y1+y22,z1+z22)M=\left(\frac{x_1+x_2}2,\frac{y_1+y_2}2,\frac{z_1+z_2}2\right)
    Volumes: pyramid, cone and sphere
    Vpyramid=13Ah,Vcone=13πr2h,Vsphere=43πr3V_{\rm pyramid}=\frac13 Ah,\quad V_{\rm cone}=\frac13\pi r^2h,\quad V_{\rm sphere}=\frac43\pi r^3
    Curved surface areas: cone and sphere
    Acone=πrℓ,Asphere=4πr2A_{\rm cone}=\pi r\ell,\qquad A_{\rm sphere}=4\pi r^2
    Cylinder volume and total surface area
    V=πr2h,A=2πrh+2πr2V=\pi r^2h,\qquad A=2\pi rh+2\pi r^2
    Hemisphere volume and total surface area
    V=23πr3,A=3πr2V=\frac23\pi r^3,\qquad A=3\pi r^2
  • Solve triangles in context

    Use right-triangle ratios, the sine rule, cosine rule and triangle area formula. Consider the ambiguous sine-rule case and check whether an angle is plausible.

    • Label side a opposite angle A, and likewise for b and c. Use the cosine rule for two sides and their included angle, or for all three sides.
    • With sine-rule side-side-angle information, an acute angle from inverse sine may have a supplementary candidate. Check each against the angle sum and stated geometry.
    Right-triangle ratios
    sin⁡θ=oppositehypotenuse,cos⁡θ=adjacenthypotenuse\sin\theta=\frac{\mathrm{opposite}}{\mathrm{hypotenuse}},\quad\cos\theta=\frac{\mathrm{adjacent}}{\mathrm{hypotenuse}}
    Tangent ratio
    tan⁡θ=oppositeadjacent\tan\theta=\frac{\mathrm{opposite}}{\mathrm{adjacent}}
    Sine and cosine rules
    asin⁡A=bsin⁡B=csin⁡C\frac a{\sin A}=\frac b{\sin B}=\frac c{\sin C}
    Cosine rule and area
    c2=a2+b2−2abcos⁡C,K=12absin⁡Cc^2=a^2+b^2-2ab\cos C,\qquad K=\frac12 ab\sin C
  • Translate a written situation into a diagram

    Represent elevation, depression, bearings and spatial geometry with labelled lengths and angles. Keep a consistent reference direction throughout the solution.

    • Measure bearings clockwise from north and state them using three figures. Draw a north line at each relevant location before finding an interior triangle angle.
    • Elevation and depression are measured from horizontal lines. In three dimensions, isolate the plane containing the angle; a line–plane angle uses the line’s projection onto the plane.
    Pythagoras in a right triangle
    a2+b2=c2a^2+b^2=c^2
    Horizontal distance x and height h
    tan⁡θ=hx\tan\theta=\frac hx
  • Use radians for circular measurement

    Convert between degrees and radians and calculate arc length and sector area. Match the formula to the angle unit before substituting a value.

    • One full revolution is 2π radians. These arc and sector formulas require the angle in radians, even if the question starts in degrees.
    • For a circular segment subtract the triangle area from its sector. A perimeter may include two radii or a chord as well as an arc.
    Degree–radian conversion
    θrad=π180θdeg\theta_{\rm rad}=\frac{\pi}{180}\theta_{\rm deg}
    Arc length and sector area
    s=rθ,A=12r2θs=r\theta,\qquad A=\frac12r^2\theta
    Segment area for 0 ≤ θ ≤ π
    Asegment=12r2(θ−sin⁡θ)A_{\rm segment}=\frac12r^2(\theta-\sin\theta)
  • Read the unit circle and exact values

    Find sine, cosine and tangent for standard angles and related angles. Use the quadrant to determine the sign and recognise where tangent is undefined.

    • A unit-circle point at angle θ has coordinates (cos θ, sin θ). The signs follow the quadrant, while tangent is the quotient of those coordinates.
    • Obtain exact values from the 30°–60°–90° and 45°–45°–90° triangles. Tangent is undefined when cosine is zero.
    Exact values
    sin⁡π6=12,cos⁡π4=22,tan⁡π3=3\sin\frac\pi6=\frac12,\quad\cos\frac\pi4=\frac{\sqrt2}2,\quad\tan\frac\pi3=\sqrt3
    Unit circle identity and tangent
    sin⁡2θ+cos⁡2θ=1,tan⁡θ=sin⁡θcos⁡θ\sin^2\theta+\cos^2\theta=1,\qquad\tan\theta=\frac{\sin\theta}{\cos\theta}
  • Use identities and double-angle relationships

    Simplify expressions with the Pythagorean and double-angle identities. Choose an equivalent form that helps with the equation rather than changing every expression at once.

    • Use the Pythagorean identity to replace a squared sine or cosine. Choose a double-angle form that reduces the number of different functions in an equation.
    • Dividing by a trigonometric expression can discard solutions where it is zero. Check those values separately and retain only solutions in the required interval.
    Double-angle sine
    sin⁡2θ=2sin⁡θcos⁡θ\sin2\theta=2\sin\theta\cos\theta
    Equivalent double-angle cosine forms
    cos⁡2θ=cos⁡2θ−sin⁡2θ=1−2sin⁡2θ\cos2\theta=\cos^2\theta-\sin^2\theta=1-2\sin^2\theta
    Another cosine form
    cos⁡2θ=2cos⁡2θ−1\cos2\theta=2\cos^2\theta-1
  • Model and solve with trigonometric functions

    Interpret amplitude, period, phase and vertical shift. Solve trigonometric equations on a specified interval, including equations that become quadratic after substitution.

    • For the radian model below, the amplitude is |a|, period 2π/|b| and midline y = d. Determine a phase from a known starting point, not just the maximum value.
    • When solving an equation, identify all base solutions in a full cycle and then account for periodicity. A quadratic substitution must still give an admissible sine or cosine between −1 and 1.
    Periodic model
    y=asin⁡(b(x−c))+d,T=2π∣b∣y=a\sin(b(x-c))+d,\qquad T=\frac{2\pi}{|b|}
    Sine solutions, n an integer
    sin⁡x=sin⁡α ⟹ x=α+2nπ or x=π−α+2nπ\sin x=\sin\alpha\ \Longrightarrow\ x=\alpha+2n\pi\ \text{or}\ x=\pi-\alpha+2n\pi
  • Extend trigonometric identities and inverses

    Additional HL

    Use reciprocal ratios, inverse trigonometric functions and compound-angle identities. Check the principal range of an inverse function and distinguish it from all solutions to an equation.

    • Use the prescribed principal ranges for inverse sine, cosine and tangent. Inverse notation does not mean a reciprocal trigonometric function.
    • Compound-angle identities split a sum or difference into known values. Reciprocal identities require their denominators to be non-zero.
    Compound-angle identities
    sin⁡(A±B)=sin⁡Acos⁡B±cos⁡Asin⁡B\sin(A\pm B)=\sin A\cos B\pm\cos A\sin B
    Compound-angle cosine
    cos⁡(A±B)=cos⁡Acos⁡B∓sin⁡Asin⁡B\cos(A\pm B)=\cos A\cos B\mp\sin A\sin B
    Reciprocal ratios
    sec⁡x=1cos⁡x,csc⁡x=1sin⁡x,cot⁡x=1tan⁡x\sec x=\frac1{\cos x},\quad\csc x=\frac1{\sin x},\quad\cot x=\frac1{\tan x}
  • Build vectors in two and three dimensions

    Additional HL

    Represent position and displacement, combine vectors and find magnitudes or unit vectors. Use vector reasoning to justify a geometric relationship rather than only drawing it.

    • Subtract position vectors to obtain displacement. A unit vector gives direction with magnitude one; the zero vector has no defined unit direction.
    • Parallel non-zero vectors are scalar multiples. Use the component equations to prove collinearity or to find an unknown coordinate.
    Displacement, magnitude and unit vector
    AB→=b−a,∣v∣=vx2+vy2+vz2,v^=v∣v∣\overrightarrow{AB}=\mathbf b-\mathbf a,\quad|\mathbf v|=\sqrt{v_x^2+v_y^2+v_z^2},\quad\widehat{\mathbf v}=\frac{\mathbf v}{|\mathbf v|}
  • Use scalar and vector products

    Additional HL

    Find angles and test perpendicularity with a scalar product. Use a vector product for perpendicular directions and areas, checking the order of the vectors.

    • The scalar product is a number and tests perpendicularity of non-zero vectors. The vector product is a vector perpendicular to both inputs.
    • The magnitude of a vector product gives the area of the spanned parallelogram. Reverse the order and its direction reverses; a triangle has half the parallelogram area.
    Scalar product and angle
    a⋅b=axbx+ayby+azbz=∣a∣∣b∣cos⁡θ\mathbf a\cdot\mathbf b=a_xb_x+a_yb_y+a_zb_z=|\mathbf a||\mathbf b|\cos\theta
    Vector product magnitude and area
    ∣a×b∣=∣a∣∣b∣sin⁡θ,K△=12∣a×b∣|\mathbf a\times\mathbf b|=|\mathbf a||\mathbf b|\sin\theta,\qquad K_\triangle=\frac12|\mathbf a\times\mathbf b|
  • Analyse vector lines and planes

    Additional HL

    Move between vector, parametric and Cartesian descriptions. Find intersections and angles and distinguish parallel, coincident, intersecting and skew configurations.

    • A line uses a point and direction; a plane uses a point and normal or two independent directions. Solve component equations simultaneously for intersections.
    • Two non-parallel lines in space need not intersect: they can be skew. A line–plane angle is complementary to the angle between the direction and the normal.
    Line and plane forms
    r=a+λd,(r−p)⋅n=0\mathbf r=\mathbf a+\lambda\mathbf d,\qquad(\mathbf r-\mathbf p)\cdot\mathbf n=0
    Acute line–plane angle
    sin⁡θ=∣d⋅n∣∣d∣∣n∣\sin\theta=\frac{|\mathbf d\cdot\mathbf n|}{|\mathbf d||\mathbf n|}
04

Statistics and probability

33 recommended hours · 9 study skills

Extend distribution reasoning without losing the meaning of a condition.

  • Evaluate a sample and a data display

    Distinguish populations, samples and variable types. Identify sampling bias, outliers and limitations before using histograms, cumulative frequency curves or box plots to support a conclusion.

    • Distinguish discrete counts from continuous measurements and a population parameter from a sample statistic. Compare random, systematic, stratified, quota and opportunity approaches in their context.
    • In a histogram the area represents frequency: unequal class widths require frequency density. Cumulative-frequency curves give approximate medians and quartiles. An outlier rule flags values for investigation rather than automatically deleting them.
    Histogram frequency density
    density=frequencyclass width\mathrm{density}=\frac{\mathrm{frequency}}{\mathrm{class\ width}}
    Interquartile range and outlier fences
    IQR=Q3−Q1,Q1−1.5IQR, Q3+1.5IQRIQR=Q_3-Q_1,\qquad Q_1-1.5IQR,\ Q_3+1.5IQR
  • Summarise centre and spread

    Calculate and interpret mean, median, quartiles, variance and standard deviation, including grouped-data estimates. Explain how adding or multiplying a constant changes the summary measures.

    • Use frequency weights where observations repeat, and class midpoints for grouped-data estimates. A standard deviation has the original units; a variance has squared units.
    • Adding a constant moves the centre but leaves spread unchanged. Multiplying by a constant scales the standard deviation by its magnitude and variance by its square.
    Mean and population variance
    xˉ=∑fixi∑fi,σ2=∑fi(xi−xˉ)2∑fi\bar x=\frac{\sum f_ix_i}{\sum f_i},\qquad\sigma^2=\frac{\sum f_i(x_i-\bar x)^2}{\sum f_i}
    Linear change of data
    ax+b‾=axˉ+b,σax+b=∣a∣σx\overline{ax+b}=a\bar x+b,\qquad\sigma_{ax+b}=|a|\sigma_x
  • Interpret correlation and both regression directions

    Read a scatter plot and Pearson’s correlation, then use the appropriate regression equation for prediction. Do not confuse correlation with causation or reverse a regression line without checking.

    • Pearson’s r measures the strength and direction of linear association. Its value lies between −1 and 1; a value near zero does not rule out a nonlinear relationship.
    • Use regression of y on x to predict y from x and regression of x on y for the reverse task. Both pass through the centroid; they are generally not algebraic inverses.
    Regression of y on x
    y^−yˉ=rσyσx(x−xˉ)\widehat y-\bar y=r\frac{\sigma_y}{\sigma_x}(x-\bar x)
    Reverse regression
    x^−xˉ=rσxσy(y−yˉ)\widehat x-\bar x=r\frac{\sigma_x}{\sigma_y}(y-\bar y)
  • Organise events and conditional probabilities

    Use sample spaces, Venn diagrams, trees and tables. Apply addition and multiplication rules, distinguish independence from mutual exclusion, and interpret the condition in a conditional probability.

    • Mutually exclusive events have no common outcome; independent events do not change each other’s probability. Non-zero mutually exclusive events are not independent.
    • On a probability tree multiply along a path and add disjoint paths. For a conditional question restrict the sample space to the event after the vertical bar.
    Addition and complement rules
    P(A∪B)=P(A)+P(B)−P(A∩B),P(Ac)=1−P(A)P(A\cup B)=P(A)+P(B)-P(A\cap B),\quad P(A^c)=1-P(A)
    Conditional probability
    P(A∣B)=P(A∩B)P(B)(P(B)>0)P(A\mid B)=\frac{P(A\cap B)}{P(B)}\quad(P(B)>0)
    Independence test
    P(A∩B)=P(A)P(B)P(A\cap B)=P(A)P(B)
  • Describe a discrete random variable

    Build a probability distribution and calculate its expected value. Check that probabilities are valid and add to one before using the distribution.

    • List the possible numerical values of X and their probabilities. Expected value is a long-run weighted average, so it need not be a value a single trial can produce.
    • When a game has a payment or entry fee, define whether X is a payout or a net gain. Subtracting the fee changes expected gain.
    Probability distribution conditions
    0≤pi≤1,∑ipi=10\leq p_i\leq1,\qquad\sum_i p_i=1
    Expected value
    E(X)=∑ixipiE(X)=\sum_i x_ip_i
  • Use a binomial model

    Identify a fixed number of independent trials with a constant success probability. Calculate relevant probabilities and interpret the model’s mean and variance in context.

    • A binomial variable counts successes in n independent Bernoulli trials with the same probability p. Sampling without replacement can violate the independence assumption.
    • Translate at least and more than carefully. Use a cumulative probability and its complement where this saves work.
    Binomial probability
    P(X=k)=(nk)pk(1−p)n−kP(X=k)=\binom nk p^k(1-p)^{n-k}
    Mean and variance
    X∼B(n,p),E(X)=np,Var⁡(X)=np(1−p)X\sim B(n,p),\qquad E(X)=np,\quad\operatorname{Var}(X)=np(1-p)
  • Use a normal model and standardisation

    Find normal probabilities or inverse values with technology and interpret z-scores. Set up equations when an unknown mean or standard deviation must be determined from probability information.

    • A normal model is continuous and symmetric about μ. Its standard deviation σ must be positive; probabilities are areas, so the probability at a single exact value is zero.
    • Use inverse-normal technology for a percentile. Draw the shaded region first when finding an unknown mean or spread from two probability statements.
    Normal notation and standardisation
    X∼N(μ,σ2),Z=X−μσX\sim N(\mu,\sigma^2),\qquad Z=\frac{X-\mu}{\sigma}
    Standardisation of a threshold
    P(X<a)=P ⁣(Z<a−μσ)P(X<a)=P\!\left(Z<\frac{a-\mu}{\sigma}\right)
  • Reverse conditional information with Bayes’ theorem

    Additional HL

    Combine prior probabilities with conditional information using a tree or formula. State the event being conditioned on and include all relevant routes in the denominator.

    • Bayes’ theorem reverses the direction of a conditional probability. The probability of evidence in the denominator includes every possible source of that evidence.
    • For a partition of mutually exclusive, exhaustive events Aᵢ, calculate each prior times its conditional likelihood before normalising.
    Bayes’ theorem
    P(A∣B)=P(B∣A)P(A)P(B)P(A\mid B)=\frac{P(B\mid A)P(A)}{P(B)}
    Total probability
    P(B)=∑iP(B∣Ai)P(Ai)P(B)=\sum_i P(B\mid A_i)P(A_i)
  • Analyse continuous distributions and transformed variables

    Additional HL

    Use probability density functions to find probabilities, mean, variance, median or mode where required. Explain the effect of a linear transformation on expected value and variance.

    • A probability density is non-negative and integrates to one; its height is not itself a probability. Find a median by equating the area to its left to one half.
    • Variance is the second moment minus the square of the mean. For a linear transformation, translation affects the mean but not variance.
    Density and interval probability
    ∫−∞∞f(x) dx=1,P(a<X<b)=∫abf(x) dx\int_{-\infty}^{\infty}f(x)\,dx=1,\qquad P(a<X<b)=\int_a^b f(x)\,dx
    Moments
    E(X)=∫−∞∞xf(x) dx,Var⁡(X)=E(X2)−[E(X)]2E(X)=\int_{-\infty}^{\infty}xf(x)\,dx,\quad\operatorname{Var}(X)=E(X^2)-[E(X)]^2
    Linear transformation
    E(aX+b)=aE(X)+b,Var⁡(aX+b)=a2Var⁡(X)E(aX+b)=aE(X)+b,\quad\operatorname{Var}(aX+b)=a^2\operatorname{Var}(X)
05

Calculus

55 recommended hours · 13 study skills

Choose and justify techniques in multi-step, unfamiliar problems.

  • Connect a derivative to a rate and a gradient

    Interpret limiting change, tangent gradient and the derivative function. Use the sign of a derivative to describe where the original function increases or decreases.

    • The derivative is the limit of the gradient of a secant as its input step tends to zero. It describes an instantaneous rate, not an average over a whole interval.
    • Positive derivative means local increase and negative derivative local decrease. A derivative of zero identifies a candidate stationary point but does not on its own classify it.
    Derivative from first principles
    f′(x)=lim⁡h→0f(x+h)−f(x)hf'(x)=\lim_{h\to0}\frac{f(x+h)-f(x)}h
    Average rate over an interval
    f(b)−f(a)b−a\frac{f(b)-f(a)}{b-a}
  • Differentiate the required elementary functions

    Use power, exponential, logarithmic and trigonometric derivatives. Apply the chain, product and quotient rules, showing the function structure before simplifying.

    • Use radians for trigonometric differentiation. Write the inner and outer functions before using the chain rule, and do not drop the inner derivative.
    • For a quotient, keep the numerator order consistent. Simplify only after the derivatives have been formed correctly.
    Power, exponential and logarithm
    ddxxn=nxn−1,ddxex=ex,ddxln⁡x=1x\frac{d}{dx}x^n=nx^{n-1},\quad\frac{d}{dx}e^x=e^x,\quad\frac{d}{dx}\ln x=\frac1x
    Trigonometric derivatives
    (sin⁡x)′=cos⁡x,(cos⁡x)′=−sin⁡x(\sin x)'=\cos x,\qquad(\cos x)'=-\sin x
    General exponential derivative, a > 0
    ddxax=axln⁡a\frac{d}{dx}a^x=a^x\ln a
    Product, quotient and chain rules
    (uv)′=u′v+uv′,(uv)′=u′v−uv′v2(uv)'=u'v+uv',\quad\left(\frac uv\right)'=\frac{u'v-uv'}{v^2}
    Chain rule
    ddxf(g(x))=f′(g(x))g′(x)\frac{d}{dx}f(g(x))=f'(g(x))g'(x)
  • Find tangents, normals and second derivatives

    Evaluate a gradient at the correct input and form a line equation. Use a second derivative to describe curvature and connect the graphs of a function and its derivatives.

    • Substitute the input into f to find the point and into f′ to find the tangent gradient. A normal is perpendicular to that tangent.
    • The second derivative describes how gradient changes. If f′ is zero, a positive f″ gives a local minimum and a negative f″ gives a local maximum; zero is inconclusive.
    Tangent at x = a
    y−f(a)=f′(a)(x−a)y-f(a)=f'(a)(x-a)
    Normal gradient, if f′(a) ≠ 0
    mnormal=−1f′(a)m_{\rm normal}=-\frac1{f'(a)}
    Second derivative
    f′′(x)=ddxf′(x)f''(x)=\frac{d}{dx}f'(x)
  • Justify extrema and optimisation

    Find stationary points, classify them and consider boundaries where relevant. Explain the meaning of an optimum and check that it lies in the allowed domain.

    • Translate the constraint into a single-variable objective and state its domain. Find stationary candidates and check endpoints where the interval includes them.
    • A change of sign of f′ classifies a turning point. An inflection requires a change in concavity; f″ = 0 alone is insufficient.
    Stationary-point condition
    f′(x)=0f'(x)=0
    Second-derivative classification at a stationary point
    f′′(a)>0⇒local minimum,f′′(a)<0⇒local maximumf''(a)>0\Rightarrow\text{local minimum},\quad f''(a)<0\Rightarrow\text{local maximum}
  • Distinguish position, velocity and distance

    Differentiate or integrate a motion model with consistent units. Separate signed displacement from total distance and account for a change of direction.

    • Velocity is signed: its sign describes direction relative to the chosen positive axis. Speed is the magnitude of velocity.
    • Integrating velocity gives displacement. Split the interval at relevant zeros of velocity or integrate speed to obtain distance travelled.
    Motion derivatives
    v(t)=s′(t),a(t)=v′(t)=s′′(t)v(t)=s'(t),\qquad a(t)=v'(t)=s''(t)
    Displacement and distance
    Δs=∫abv(t) dt,D=∫ab∣v(t)∣ dt\Delta s=\int_a^b v(t)\,dt,\qquad D=\int_a^b|v(t)|\,dt
  • Find and interpret antiderivatives

    Integrate the required powers, reciprocal and exponential forms and suitable linear composites. Use an initial condition to find an integration constant and explain what it represents.

    • An indefinite integral represents a family of antiderivatives, so include a constant. Use a supplied point or initial value to determine it.
    • For a linear argument ax + b, compensate for its derivative a. Differentiate your answer to check both the coefficient and the original domain.
    Power integral, n ≠ −1
    ∫xn dx=xn+1n+1+C\int x^n\,dx=\frac{x^{n+1}}{n+1}+C
    Reciprocal and exponential integrals
    ∫1x dx=ln⁡∣x∣+C,∫eax+b dx=1aeax+b+C (a≠0)\int\frac1x\,dx=\ln|x|+C,\qquad\int e^{ax+b}\,dx=\frac1a e^{ax+b}+C\ (a\ne0)
    Trigonometric antiderivatives
    ∫cos⁡x dx=sin⁡x+C,∫sin⁡x dx=−cos⁡x+C\int\cos x\,dx=\sin x+C,\qquad\int\sin x\,dx=-\cos x+C
  • Calculate definite integrals and areas

    Use exact integration or technology as directed. Find intersections and split an interval where needed so that geometric area is not confused with a signed integral.

    • The fundamental theorem connects a definite integral with an antiderivative. Evaluate the upper-bound value minus the lower-bound value.
    • For geometric area between two curves, determine which is above the other and split at intersections if their order changes. Areas must be non-negative.
    Fundamental theorem
    ∫abf(x) dx=F(b)−F(a)(F′=f)\int_a^b f(x)\,dx=F(b)-F(a)\quad(F'=f)
    Area between curves
    A=∫ab∣f(x)−g(x)∣ dxA=\int_a^b|f(x)-g(x)|\,dx
  • Evaluate limits and examine continuity

    Additional HL

    Use algebra and the permitted limit techniques, including l’Hôpital’s rule in suitable cases. Check the conditions for a method before applying it to a limiting expression.

    • Factorisation, rationalisation or a known limit may resolve an indeterminate form. A function is continuous at a point when its limit there equals its defined value.
    • L’Hôpital’s rule applies under its differentiability and limit conditions to 0/0 or infinite-over-infinite forms. Differentiate numerator and denominator separately, rather than applying the quotient rule.
    Continuity at x = a
    lim⁡x→af(x)=f(a)\lim_{x\to a}f(x)=f(a)
    L’Hôpital form, when its conditions hold
    lim⁡x→af(x)g(x)=lim⁡x→af′(x)g′(x)\lim_{x\to a}\frac{f(x)}{g(x)}=\lim_{x\to a}\frac{f'(x)}{g'(x)}
  • Differentiate implicit and inverse relationships

    Additional HL

    Use implicit differentiation, related rates and the prescribed reciprocal or inverse trigonometric derivatives. Keep track of which quantities vary with the independent variable.

    • When y depends on x, differentiating a term containing y introduces dy/dx by the chain rule. For related rates, differentiate with respect to the common time variable.
    • Inverse-trigonometric derivatives use radians and have domain restrictions. For example, the inverse-sine derivative below requires |x| < 1.
    Implicit example: a circle
    x2+y2=r2 ⟹ dydx=−xy(y≠0)x^2+y^2=r^2\ \Longrightarrow\ \frac{dy}{dx}=-\frac xy\quad(y\ne0)
    Inverse-trigonometric derivatives
    (arcsin⁡x)′=11−x2,(arctan⁡x)′=11+x2(\arcsin x)'=\frac1{\sqrt{1-x^2}},\qquad(\arctan x)'=\frac1{1+x^2}
    Further trigonometric derivatives
    (tan⁡x)′=sec⁡2x,(arccos⁡x)′=−11−x2(\tan x)'=\sec^2x,\qquad(\arccos x)'=-\frac1{\sqrt{1-x^2}}
  • Choose a more advanced integration method

    Additional HL

    Select substitution, integration by parts or partial fractions for the required forms. Check an antiderivative by differentiating it and apply limits only after the method is sound.

    • A substitution should replace the differential as well as the expression. For definite integrals change the bounds to the new variable or return to the original variable before evaluation.
    • Integration by parts reverses the product rule. Choose which factor to differentiate so the resulting integral is simpler; some problems require using it more than once.
    Substitution
    u=g(x),du=g′(x) dxu=g(x),\quad du=g'(x)\,dx
    Integration by parts
    ∫udvdx dx=uv−∫vdudx dx\int u\frac{dv}{dx}\,dx=uv-\int v\frac{du}{dx}\,dx
    Inverse-trigonometric antiderivatives, a > 0
    ∫dxa2+x2=1aarctan⁡xa+C\int\frac{dx}{a^2+x^2}=\frac1a\arctan\frac xa+C
    Inverse-sine antiderivative, |x| < a
    ∫dxa2−x2=arcsin⁡xa+C\int\frac{dx}{\sqrt{a^2-x^2}}=\arcsin\frac xa+C
  • Model volumes by integration

    Additional HL

    Set up the required volume of revolution and related area calculations. A labelled region and correct bounds matter before any evaluation takes place.

    • A cross-section perpendicular to the axis gives a disc or washer. The radii are distances from the axis, not necessarily the unshifted function values.
    • Identify intersections and limits from a diagram first. The volume is in cubic units and is non-negative.
    Revolution about the x-axis
    V=π∫ab[y(x)]2 dxV=\pi\int_a^b[y(x)]^2\,dx
    Washer setup
    V=π∫ab(R(x)2−r(x)2) dxV=\pi\int_a^b\bigl(R(x)^2-r(x)^2\bigr)\,dx
  • Solve and approximate differential equations

    Additional HL

    Use separation of variables, the prescribed first-order methods and Euler’s method. Interpret an initial condition and assess whether a numerical result is reasonable for the model.

    • For a separable equation, move the y expression with dy and the x expression with dx, retaining any equilibrium solutions lost by division.
    • Use an integrating factor for a first-order linear equation. Euler’s method uses the current gradient and a stated step; it is an approximation, not an exact analytic solution.
    Separation
    dydx=g(x)h(y) ⟹ ∫dyh(y)=∫g(x) dx\frac{dy}{dx}=g(x)h(y)\ \Longrightarrow\ \int\frac{dy}{h(y)}=\int g(x)\,dx
    Linear equation and integrating factor
    y′+P(x)y=Q(x),I(x)=e∫P(x) dxy'+P(x)y=Q(x),\qquad I(x)=e^{\int P(x)\,dx}
    Euler step
    xn+1=xn+h,yn+1=yn+hf(xn,yn)x_{n+1}=x_n+h,\qquad y_{n+1}=y_n+h f(x_n,y_n)
  • Use a Maclaurin expansion

    Additional HL

    Generate and manipulate the required series, including expansions obtained by substitution, differentiation or integration. Match the order retained to the accuracy or coefficient being requested.

    • A Maclaurin series is expanded at zero. Generate coefficients using derivatives at zero, then retain enough terms to answer the requested order.
    • Substitution, multiplication, differentiation or integration can produce new series. State a valid interval when required; not every infinite series represents its function for all inputs.
    Maclaurin expansion
    f(x)=f(0)+f′(0)x+f′′(0)2!x2+⋯f(x)=f(0)+f'(0)x+\frac{f''(0)}{2!}x^2+\cdots
    Standard expansions
    ex=∑n=0∞xnn!,sin⁡x=x−x33!+x55!−⋯e^x=\sum_{n=0}^{\infty}\frac{x^n}{n!},\qquad\sin x=x-\frac{x^3}{3!}+\frac{x^5}{5!}-\cdots
    Cosine series
    cos⁡x=1−x22!+x44!−⋯\cos x=1-\frac{x^2}{2!}+\frac{x^4}{4!}-\cdots
    Logarithm series, |x| < 1
    ln⁡(1+x)=x−x22+x33−⋯\ln(1+x)=x-\frac{x^2}2+\frac{x^3}3-\cdots
    Inverse-tangent series, |x| < 1
    arctan⁡x=x−x33+x55−⋯\arctan x=x-\frac{x^3}3+\frac{x^5}5-\cdots

The topic hours total 210. A further 30 hours support inquiry, problem solving, modelling and the exploration, giving 240 hours overall. This is recommended course time, not a revision timetable or an exam-weighting table.

KNOW THE TASK BEFORE PRACTISING

AA HL assessment and calculator rules

These figures describe the current course. The written papers contribute 80% and the mathematical exploration contributes 20%. Check the 2029 changes if you are preparing for the revised course.

Current IB Math AA HL written assessment
ComponentTimeMarksWeightCalculator / task
Paper 1120 minutes11030%Not permitted
Short and extended responses
Paper 2120 minutes11030%Required
Short and extended responses
Paper 375 minutes5520%Required
Two extended problem-solving questions
Exploration / IACoursework2020%Your own mathematical investigation

Paper 3 timing: use 75 minutes for the current course. Some older subject briefs show 60 minutes; IB’s published course update identifies 75 minutes as the previous/current timing and 60 minutes for the revised first-assessment-2029 course. Check the timetable for your own session.

For Paper 1, practise exact values, symbolic manipulation and a complete written method. For the technology papers, choose a useful graph window and connect a numerical result to the setup you wrote. Use the permitted-model and exam-mode instructions supplied by your school. A formula booklet is available in the written examinations, but recognising a formula does not replace selecting and justifying a method.

TRY A PIECE OF THE MATHEMATICS

Link a complex-number calculation to a rotation

Let z = 1 + i. Express z in polar form and calculate z⁴.

Show the worked explanation
  1. The modulus is √2 and an argument is π/4, so z = √2(cos(π/4) + i sin(π/4)).
  2. De Moivre’s theorem gives z⁴ = (√2)⁴(cos π + i sin π) = −4.
  3. A Cartesian check gives (1 + i)² = 2i and (2i)² = −4. Multiplication changes both modulus and argument.

Check the reasoning: Raise the modulus to the power as well as multiplying the argument. Leaving the modulus at √2 loses part of the transformation.

Try a fresh version

For 1 − i, use argument −π/4. Its fourth power is also −4. Explain why the intermediate rotations differ even though the final values agree.

Original OnlyPrepy practice example. It is not an official IB examination question or mark scheme.

REVIEW THE DECISIONS BEHIND YOUR ANSWERS

Where AA HL Students Lose Marks

AA HL questions often connect several topics, so an unsupported step early in a solution can affect everything that follows. Review both the advanced method and the algebra that supports it.

Leaving a proof incomplete

An induction argument may verify a base case and state a hypothesis without using it to establish the next case. Checking examples does not prove a universal claim.

What to practise: Label the base case and hypothesis, show exactly where the hypothesis is used and finish by stating the range of integers established.

Missing complex roots or the correct argument

A principal argument can be placed in the wrong quadrant, or a root calculation can stop after the first root.

What to practise: Check Cartesian signs, calculate the root modulus and list all required arguments over one complete cycle. Use the Argand geometry to check spacing.

Confusing vector relationships

Two lines in space may be non-parallel but skew. A line–plane angle is not simply the angle between the direction vector and the plane normal.

What to practise: Test intersection equations rather than assuming an intersection, identify each direction or normal vector and label the angle being calculated.

Choosing calculus techniques without checking their conditions

A substitution may omit the differential or new bounds. A limit rule may be applied to a form for which it is not justified.

What to practise: Write the substitution and differential together, keep variable-consistent bounds and identify the indeterminate form before using a limit technique.

Losing the thread in Paper 3

Treating an unfamiliar problem as unrelated short exercises can hide how an earlier result guides a later generalisation.

What to practise: Annotate what each part establishes, reuse the given or derived relationships and communicate partial reasoning if you cannot complete a later step.

When you review a question, label the first error as a concept, method, accuracy or interpretation issue. Correct that step, then attempt a fresh question before reading its solution.

MAKE STRONGER ANSWERS REPEATABLE

What Separates a 5 from a 7 in AA HL

Progress towards a 7 in AA HL depends on depth as well as coverage: selecting a method, sustaining an argument and checking its conditions when several ideas meet in one problem.

These are practice targets, not official grade boundaries. Your final grade depends on the assessed work and the boundaries for your examination session.

Developing stronger AA HL responses
SkillA habit to improveA stronger response
ProofRecognise the intended proof technique but leave a logical gap.State assumptions, connect every implication and explain why the conclusion covers the required cases.
RepresentationRemain with the first algebraic, complex or vector form encountered.Switch deliberately to a representation that exposes a rotation, factor, intersection or symmetry.
Advanced calculusRecall a technique but struggle to choose among several options.Explain why substitution, parts, partial fractions or a series suits the structure and check the resulting expression.
Unfamiliar problemsWait for a recognisable template or a complete route to the answer.Use earlier results, test a useful special case and develop a justified partial route before generalising.
ReliabilityUnderstand the extension but lose signs, constants or domain conditions.Protect the argument with accurate foundations, consistent notation and checks of boundary or exceptional cases.

Check your independence

Choose a multi-part problem combining functions with calculus, or complex numbers with geometry. Can you explain why each representation is useful and complete the argument without relying on a remembered solution?

FEEDBACK YOU CAN USE IN YOUR NEXT ATTEMPT

How Tutoring Helps in AA HL

AA HL tutoring can help you analyse how to begin a difficult problem and how to justify the route you choose. Sessions should include your attempts and reasoning, rather than only watching a tutor solve questions.

  1. Separate foundation gaps from extension gaps

    Check whether a failed advanced solution began with insecure algebra or with the new HL idea. Practise the missing prerequisite before retrying the full argument.

  2. Develop proof and representation choices

    Compare possible approaches to induction, complex roots or vector geometry. Explain the assumptions and why one form makes the next step clearer.

  3. Rehearse extended problem solving

    Attempt a Paper 3-style sequence, pause to identify what earlier parts contribute and practise communicating a justified partial solution under time constraints.

  4. Transfer the method to a fresh task

    Follow guided feedback with a new problem that changes the surface details. Review whether you chose the method independently and which checks you remembered.

What to bring to a session

Bring an incomplete extended problem and mark the first line you cannot justify. A focused session can compare two approaches, repair that gap and leave a related proof or modelling task for independent follow-up.

For exploration support, bring your own question, reasoning and draft working. Guidance should help you make and explain your own mathematical decisions; your assessed submission must remain your own.

Explore IB tutoring or discuss AA HL support. Include your course, exam session and the specific skill or question you want to work on.

INVESTIGATE A QUESTION OF YOUR OWN

The mathematical exploration in AA HL

The internal assessment, often called the IA, is an individual mathematical exploration worth 20%. Choose a focused question that lets you explain mathematics you understand. A manageable investigation with thoughtful decisions is more useful than a collection of advanced calculations you cannot justify.

For the current course, the five criteria total 20 marks. The Use of mathematics criterion has level-specific expectations; using an impressive technique without understanding it does not establish that those expectations are met.

  • Presentation4 marks
  • Mathematical communication4 marks
  • Personal engagement3 marks
  • Reflection3 marks
  • Use of mathematics6 marks

Make the investigation yours

Explain the mathematical choices, assumptions and connections that drive your argument. Check an algebraic result against another representation, and reflect on what the result does and does not show. Keep sources and intermediate work so the development of your reasoning is clear.

Follow your school’s current academic-integrity policy. Guidance can help you understand requirements, plan a method or reflect on your reasoning; a tutor must not produce or rewrite your assessed submission. The revised 2029 course uses different criteria, outlined below.

FROM A TOPIC LIST TO A NEXT STEP

Build a practical AA HL revision routine

  1. Keep an SL-foundation set alongside additional HL work: a missed algebraic restriction can undermine an advanced solution.
  2. Practise extended problems that connect calculus, vectors, complex numbers or proof, and justify the transition between steps.
  3. Rehearse Paper 3 under the current 75-minute directions. Use earlier parts as information and communicate partial reasoning clearly.

Use a short review cycle

Choose one checklist skill and attempt a fresh question without its solution. Keep your original working, identify the first point where your reasoning breaks down and practise that step. Return to the idea in another question after a gap, then combine it with related topics.

Use a weekly study plan to make room for this cycle, and an exam-error log to record the decision you want to improve. Practise with the IB Math AA HL May 2026 Paper 1, 2 and 3 solved step by step. If you need guided practice, explore IB tutoring and include your exact course, level and examination session.

FIRST TEACHING AUGUST 2027 · FIRST ASSESSMENT MAY 2029

What changes for AA HL in 2029?

The current checklist above must not be treated as the complete revised syllabus. IB has published the following changes and a revised subject brief. Students taking the current course through November 2028 should continue to prepare its required content.

  • The announced removals include financial applications, proof by counterexample, bivariate data and Euler’s method.
  • Paper 1 and Paper 2 each reduce from 110 to 100 marks. Paper 3 reduces from 55 to 50 marks and from 75 to 60 minutes.
  • The exploration remains 20%, with the same revised inquiry-based criteria at SL and HL.
Recommended topic hours: current and first-assessment-2029 AA HL
Study areaCurrentFrom 2029
Number and algebra3942
Functions3246
Geometry and trigonometry5135
Statistics and probability3328
Calculus5559
Inquiry and exploration3030

IB reorganises the revised content under its updated topic labels; the table groups comparable areas for orientation. Hours are teaching recommendations. They do not specify the percentage of exam marks.

Revised exploration criteria

From first assessment 2029, the exploration uses four criteria at both levels: Problem specification (4), Abstraction (6), Computation (4) and Interpretation (6). Use the appropriate criteria for your own session rather than combining them with the current five-criterion scheme.

Confirm the revised course requirements and assessment criteria with your teacher before planning for your new examination session.

CHOOSE THE MATHEMATICS YOU WANT TO STUDY

AA HL vs the other IB math courses

Start with your interests, current foundations and future course requirements. AA and AI study mathematics with different emphases. HL adds substantial breadth and depth; calculator access does not make AI an easier version of AA.

All four courses at a glance · current course through November 2028
CourseMathematical focusTime and assessmentWho might prefer it?
AA SLAlgebraic reasoning, functions and calculus with exact methods.150 hours · 2 written papers
Paper 1 without a calculator; calculator required for remaining papers.
Exploration: 20%.
You enjoy understanding how an algebraic method works and want a standard-level course with substantial symbolic practice.
AA HLYou are hereDeeper proof, complex numbers, vectors and calculus alongside the shared AA foundations.240 hours · 3 written papers
Paper 1 without a calculator; calculator required for remaining papers.
Exploration: 20%.
You enjoy abstract problems and sustained mathematical arguments, and are ready to give a higher-level course regular practice time.
AI SLData, practical models, statistical interpretation and technology-supported decisions.150 hours · 2 written papers
Calculator required for every written paper.
Exploration: 20%.
You prefer interpreting mathematics in context and want a standard-level course built around modelling and data.
AI HLAdvanced modelling and statistics, matrices, networks and differential equations.240 hours · 3 written papers
Calculator required for every written paper.
Exploration: 20%.
You enjoy data-rich problems and using technology to investigate substantial mathematics, and can commit to higher-level depth.

Is AA HL a good fit for you?

You enjoy abstract problems and sustained mathematical arguments, and are ready to give a higher-level course regular practice time.

Useful starting strengths: Strong algebra and trigonometry, curiosity about proof and willingness to work on unfamiliar multi-step problems. You can develop these skills through practice; discuss your current readiness and the full Diploma workload with your teacher.

AA HL or AA SL?

Consider AA SL if you enjoy the AA emphasis but a standard-level workload better fits your full Diploma plan and meets your entry requirements. It does not contain the additional HL proof, vectors and advanced calculus.

See the AA SL topics and paper rules →

AA HL or AI HL?

Consider AI HL if you prefer advanced data analysis, matrices and model interpretation to the AA emphasis on exact methods and proof. Both are demanding HL courses; their content and calculator rules differ.

See the AI HL topics and paper rules →

AA HL or AI SL?

Consider AI SL if you want a standard-level modelling and data course and have checked that it meets your plans. This changes both level and emphasis, so review actual topics and entry requirements before switching.

See the AI SL topics and paper rules →

Make the choice in this order

  1. Check your intended destinations. Read the exact mathematics subject, level and grade required for each university programme and entry year. Do this before choosing a course on the basis of a career label.
  2. Try the actual style. Work through sample algebra and reasoning problems alongside modelling and data questions. Notice which explanations interest you and where your foundations need work.
  3. Plan the workload. Discuss HL subjects, school availability, support and study time with your teacher or Diploma coordinator. HL recommends 90 more hours than SL, alongside deeper content.
  4. Confirm the cohort. For assessment in 2029 or later, use the revised guide. Course choice and university recognition need to be checked against the requirements for your own year.

Neither an interest in engineering nor an interest in business selects a mathematics course by itself. Requirements vary by institution and programme; this comparison does not promise admission or equivalence.

A LITTLE MORE CLARITY

AA HL syllabus questions

Check your course, exam session and next practice step.

Tell us about your needs
What does the IB Math AA HL syllabus cover?

IB Math AA HL studies number and algebra, functions, geometry and trigonometry, statistics and probability, and calculus, alongside the mathematical exploration. HL includes the shared foundations and additional higher-level content; the checklist marks the additional groups.

Can I use a calculator in AA HL?

Paper 1 does not permit a calculator. A graphic display calculator is required for Paper 2 and Paper 3. Check your school’s current permitted-model and exam-mode instructions.

How many written papers are there in AA HL?

There are two 120-minute papers worth 30% each and a problem-solving Paper 3 worth 20%, plus the exploration worth 20%. Current Paper 3 is 75 minutes; the first-assessment-2029 version returns to 60 minutes.

Is this the AA HL syllabus for 2029?

The detailed checklist covers the current course, whose final assessment is November 2028. The separate 2029 section summarises published changes, not the complete revised guide. Match the syllabus to your assessment session and confirm it with your teacher.

How is AA HL different from AI HL?

AA gives particular emphasis to algebraic structure, exact methods and mathematical argument, including a non-calculator paper. AI emphasises modelling, statistical interpretation and technology. Both include calculus; check the actual subject and level required by a university course.

Are the topic hours the percentages of marks on the exam?

No. They are recommended teaching hours, not a guaranteed distribution of exam marks. A question can link several topics. Keep a balanced practice plan instead of using the hours to predict which questions will appear.

Does checking a skill mean I have mastered it?

No. A checkmark records that you reviewed a skill on this browser. Test your understanding with a fresh question, explain your reasoning and revisit it after a gap. The checklist is not a score prediction.

Can I get guidance with my mathematical exploration?

You can ask for help understanding the criteria, planning a method and reflecting on your own reasoning. Follow your school’s academic-integrity rules. The investigation and submitted writing must remain your own.